Cheers
It's the same one as Dreadly's - Triple R and got it from Pumaspeed
http://www.pumaspeed.co.uk/product-F...lade_16145.jsp
I actually had it installed by my local bodyshop as I wanted it done right due to stories of DIY's having them deflect/fall off at speed due to the lack of support in the middle - which is just a big gap. I ended up buying a length of this stuff
http://www.bunnings.com.au/metalmate...-tube_p1067784 and cutting 2 short pieces which were about 20mm from memory. They sit in the gap and have a bolt which goes up the guts and holds the middle in place. The stock bolts arent too crash hot either so I got my own of those. Shop ended up pulling the whole front off to make it solid. $130 install which I thought was worth it.