|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
29-03-2008, 10:12 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Sep 2007
Location: Scarness, Hervey Bay.
Posts: 830
|
Hello all,
Some may remember my issues with the car dealers pathetic choice of mechanics. I have a concern that when they replaced the power steering lines they used the wrong fluid in the system. It does look and smell like Dextron 2/3. Only since they did the work the system is fine when cold, but as soon as it warms up there is a reasonable ammount more resistance when turning the wheel and I get a nasty vibration accompanied by an also nasty sound when turning the wheel at low speeds, especially in the wet, or so it seems. Is it highly likely that they're MORE useless than a set of sizely tits on a rather well hung bull? Cheers all, Matt. |
||
29-03-2008, 10:17 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Sep 2007
Location: Scarness, Hervey Bay.
Posts: 830
|
I might add that when I picked up the vehicle they had far too much fluid in there to start with, so I have sucked some out.
I should also note that when I undo the cap when it's all nice and toasty there is always a noticeable pressure release. Matt. |
||
30-03-2008, 01:33 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
specified fluid is ESN-M2C 134D (FORD R1 -424) 0.95 litres brown stuff from memory, i could be wrong but i`m with you i dont think dextron is the right stuff.
|
||
30-03-2008, 01:59 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Sep 2007
Location: Scarness, Hervey Bay.
Posts: 830
|
Yep, it was brown last time, I have brown stuff here in a bottle.. but the stuff in there now is most certainly the telltale red dextron.
|
||
30-03-2008, 08:41 PM | #5 | ||
Donating Member
Join Date: Dec 2004
Location: QLD
Posts: 11,837
|
EL on used the different oil , a gear oil from memory
|
||
31-03-2008, 06:40 AM | #6 | ||
Regular Member
Join Date: Jan 2005
Location: Auckland NZ
Posts: 325
|
Mine had DEX3 in it when I bought it. I flushed it and filled it up with R1-424 from Ford. 10 bucks a litre. Steering more weighted and precise and pump whines less than before.
__________________
1972 Lincoln Continental Mark IV 460 V8 C6 All original . Triple Brown 1 owner from new ! |
||
Thread Tools | |
Display Modes | |
|