|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
07-07-2009, 03:54 PM
|
#1 | ||
|
Starter Motor
Join Date: Jul 2009
Posts: 2
|
Hi all,
My AU XR6 VCT has developed an oil leak from the VCT unit, and I heard a nasty rumour that to fix it there is 2 seals in the VCT itself and you need to pull the tappet cover off (and replace that gasket also!!) to get to both. Does anyone have any experience in this field? |
||
|
|
|
08-07-2009, 12:23 PM
|
#2 | ||
|
THE Fairmont Ghia 75th
Join Date: Jun 2007
Location: S.E Suburbs, Melbourne, Victoria
Posts: 615
|
is it the solenoid or the unit itself? if its the solenoid you will have to replace the whole thing but im not sure about the unit itself, have you got it off?
__________________
Current Ride : AUII Fairmont Ghia : 75th Anniversary Limited Edition
Current Mods-HD Built Gearbox+(Mirror Polished, Modified Valve Body), 2500rpm Hi-Stall Convertor(TCE Custom Built), BIG Trans Cooler, Braided Lines/Speedflow Fittings, 2.5" Exhaust, Custom CAI, Detailed UnderCarriage, Custom SQ Stereo Install. My Ride My Build Thread |
||
|
|
|
|
08-07-2009, 01:47 PM
|
#3 | ||
|
Starter Motor
Join Date: Jul 2009
Posts: 2
|
it is the unit itself, i dont have it off at the moment but i have had it off a while ago to replace the outer seal... didn't fix the problem tho!! the solenoid seems to be dry and the leak appears to be seeping from directly at the bottom, so i'm sure it is the unit itself. I'm a bit surprised as i didn't think the oil pressure there would be very high.
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
VCT Seals
Hybrid Mode