|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
19-12-2009, 04:42 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Nov 2008
Location: Melbourne, Vic
Posts: 1,121
|
Hi just wondering what is the go.
I just bought a new car the other week it is a 2002 wagon with only 83,000km on the clock. The front end allignment was clearly out as it was wearing the outside of the front left a lot. Just got it re alligned at tyrepower and they have told me after doing this that is needs new castor bushes. They also said that pedders sell them for "about $300". Apparently the standard ones aren't continuous where as the pedders ones are. Any help would be much appreciated, Rhys.
__________________
AU III Forte wagon - V8, 5spd man, lowered, 18" Honeycombs, Stock diff rebuilt with TruTrac LSD, Leather Ghia interior/dash, custom twin 2.5" into single 3" exhaust. Wagon Build AU I Forte Sedan - No longer
Toy Car Build |
||
19-12-2009, 04:54 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
maybe refering to camber castor kits, usualy about 250 fitted
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
19-12-2009, 08:24 PM | #3 | ||
Fixing Ford's **** ups
Join Date: Feb 2009
Location: In a house
Posts: 4,759
|
The car was toeing in a little to much to have that wear. I'd imagine it would have been in the area of 5 to 10MM toe in, if it was just the left front. Generally they're between 2 and 3MM toe in. Good chance it hasn't been aligned for a while.
Why did they align the car if those bushes are surposedly stuffed? I'd be back asking for my money back. It's rather obvious they just wanted your money and nothing more. It is quite possible those bushes need replacing. The only real way to tell if they are stuffed, is to physcially check them. That's not something that can be done via the net. And no they're not a camber caster kit, as some one referred to them. They are a bush that is under the radiator support panel, that is within the lower control arm assembley. |
||
19-12-2009, 08:47 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Nov 2008
Location: Melbourne, Vic
Posts: 1,121
|
Yeh i think i will certainly be questioning why they did the allignment knowing the bushes are apparently stuffed (They have always been very good to date) . I have had a look at these what i thought they were reffering to (lower control arm under the radiator). I have had the car on stands and yet i still am struggling to see the bushes full stop let alone being able to determine whether they are stuffed or not.
I think i will take the car down to my local pedders as this is what they do and aks them to have a look.
__________________
AU III Forte wagon - V8, 5spd man, lowered, 18" Honeycombs, Stock diff rebuilt with TruTrac LSD, Leather Ghia interior/dash, custom twin 2.5" into single 3" exhaust. Wagon Build AU I Forte Sedan - No longer
Toy Car Build |
||
Thread Tools | |
Display Modes | |
|