|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
26-03-2011, 06:23 PM
|
#1 | ||
|
meh.
 
Join Date: Jul 2010
Location: Was Central Coast, Now Sydney NSW
Posts: 8,584
|
Hey Guys...
What would be the best way to polish stuff up to a near-as-possible mirror finish for stuff like the ISC, T/B, upper intake, thermostat, radiator brackers, Brake lines and ABS module? Kinda getting sick of the crap flat silver finish left on some items, and just want to get the engine bay up to scratch  -Tony
__________________
Previous - BF XR6T - 325rwkw, 6 Speed Auto, Process West, X-Force and Turbosmart gear |
||
|
|
|
26-03-2011, 11:50 PM
|
#2 | ||
|
Alternator
Join Date: Jan 2011
Location: Wide Bay QLD
Posts: 251
|
most of it you would probably have to do with plain old elbow grease just keep going to finer and finer grades until you get the finish you want and be prepared to polish the inside of your engine bay alot once you are done some of it you might be able to do with a dremel or something similar
|
||
|
|
|
|
26-03-2011, 11:53 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
any alloy is best finished with autosol It's a great alloy polish
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
|
|
|
|
28-03-2011, 10:13 AM
|
#4 | |||
|
All Bran = Regular Member
Join Date: Feb 2006
Location: BrizVegas
Posts: 1,970
|
Quote:
|
|||
|
|
|
|
27-03-2011, 12:23 AM
|
#5 | ||
|
meh.
Join Date: Jul 2010
Location: Was Central Coast, Now Sydney NSW
Posts: 8,584
|
perfect..
so start with 800, then work my way through the grades to 3000, then use autosol?
__________________
Previous - BF XR6T - 325rwkw, 6 Speed Auto, Process West, X-Force and Turbosmart gear |
||
|
|
|
|
27-03-2011, 12:33 AM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
from 2000 the autosol should finish it nicely
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Polishing bits and pieces..
Hybrid Mode