Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 16-10-2012, 10:36 PM   #1
waylin
Starter Motor
 
Join Date: Jan 2010
Posts: 11
Default Front End Problem Au1 Xr8 Ute

I Have A Vibration In The Front End At Around 100k's, I've Had New Tyre's And Balance Done And Is Still There. Feels Like An Oval Tyre But All Good There. Any Thoughts Anybody

waylin is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2012, 09:49 AM   #2
auIILTD
5.6L x 2 pilot
Donating Member2
 
auIILTD's Avatar
 
Join Date: Dec 2009
Location: Canbra
Posts: 15,073
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For the effort put into the Australia day cruise to Albury Tech Writer: Recognition for the technical writers of AFF - Issue reason: AU Tech article. 
Default Re: Front End Problem Au1 Xr8 Ute

In the past, I have had a similar problem at 60kph. Turned out to be the harmonic balancer.
__________________
2002 AU II LTD

5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust.

Quarter Mile: 13.73 @ 105.86mph


Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024

2002 XR8 pursuit 250

Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
auIILTD is online now   Reply With Quote Multi-Quote with this Post
Old 17-10-2012, 10:05 AM   #3
Evgeni
Auto Nerd
 
Evgeni's Avatar
 
Join Date: Feb 2012
Location: Sydney
Posts: 808
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: In recognition of the many hours spent scanning information for the benefit of AFF members. 
Default Re: Front End Problem Au1 Xr8 Ute

Mine is a 6, but I had the same issue about a year ago. Mine turned out to be the sway bar link pins and the lower control arm bushes which was causing the main vibration.
I ended up doing all ball joints and upper arm bushes as well.
Drives like a new car now.
Evgeni is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2012, 11:28 AM   #4
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default Re: Front End Problem Au1 Xr8 Ute

delete
mik is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 11:50 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL