AU V8 throttle cable assembly (photo required)

[SVT8]

Would someone be able to post up a photo of the cable/bracket and spring underneath there V8 throttle body? Just cant remember how the dam thing goes

Iv hooked it up but im left over with a spring and a small black bracket piece :/

[fordman302]

Hope these help

[Whoosha]

And the small bracket left over supports the square black bit of the loom, it bolts in front of the other one you can just see it in the right corner as you look at it I can get a better shot if you need it

[SVT8]

Reckon you could get a photo of it all installed from underneath the throttle body? Maybee one with the air intake pipe off?

Would be much appreciated

[Whoosha]

Shall grab some in the morning for ya

[Whoosha]

From the front looking at the fire wall




On top looking down at the back of throttle body from pass.side



From driver side



cable bracket bolts to rear of T/B first then loom bracket over it



Underside to back of motor

[FTe342]

If this is for your T3 its different