|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
|
|
06-01-2022, 03:15 PM
|
#1 | ||
|
Starter Motor
Join Date: Dec 2021
Posts: 1
|
el runs on gas wont run on fuel. fuel pump runs & full tank
|
||
|
|
|
06-01-2022, 03:20 PM
|
#2 | |||
|
FF.Com.Au Hardcore
Join Date: Jan 2011
Posts: 1,400
|
Quote:
Dr Terry |
|||
|
|
|
|
06-01-2022, 03:58 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2005
Location: perth
Posts: 4,355
|
are the injectors getting a pulse ?
can pick up a pulse lame real cheap and unplug an injector and plug in the diode lamp to see if injectors are getting pulse think i paid under $20 for mine and turned out to be the problem , then had to work out where and why they wernt getting the pulse from the ecu , think it was a bad connection some where but cant remember as was quit a few years back
__________________
yes still (as money n time permit) doing the rebuilding the zh fairlane with a clevo 400m 4v heads injected whipple blown with aode 4 speed trans to a 9" ....... we'll get there eventually just remember don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic! I have taken up meditation... at least it's better than sitting around doing nothing !! |
||
|
|
|
| This user likes this post: |
|
06-01-2022, 05:03 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2005
Location: perth
Posts: 4,355
|
could also be a fuel blockage and/or bypass valve stuck open so rail isnt getting pressure to the injectors
__________________
yes still (as money n time permit) doing the rebuilding the zh fairlane with a clevo 400m 4v heads injected whipple blown with aode 4 speed trans to a 9" ....... we'll get there eventually just remember don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic! I have taken up meditation... at least it's better than sitting around doing nothing !! |
||
|
|
|
|
07-01-2022, 06:59 PM
|
#5 | ||
|
Custom user title
Join Date: Jan 2005
Posts: 1,892
|
Just check you have 12v at the injectors when running on petrol. Used to cut the power on gas. . Most likely wire has been knocked of the relay check the loom, most likely spliced near the idle speed control solenoid ( as this needs 12v on both fuel and gas)
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
el falcon runs on gas.willnot ru on petrol,fuel pump runs @ full tank have changed computer.still wont go
Hybrid Mode