|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
|
|
26-03-2005, 09:11 PM
|
#1 | ||
|
Prince Of Darkness
Join Date: Dec 2004
Location: Gold Coast, Qld
Posts: 607
|
Hi Guys,
You may not remember me i had an ED with a AU XR6 Head and i brough off you everything need for the DEV3HL cam setup and head was rebuild and oversized valves were put in. I got it dynoed and all the figures where wrong and only got 120rwkws. Ive talked two both of oyu for ages and we couldn't come to a conclusion on why its like the way it is. As advise by you brendon im going to scrap the AU XR6 head and go back to ED. I want to know what exactly i will need for the Dev4 Streetfighter setup and can i exchange cams and total cost to get the head done and cam. Also how much for just the ultra flow pipe without the filter and rest of the stuff as i only want the actual pipe itself. Also do you need a unichip for dev4 streetfighter setup? Cheers Spider P.S. Do i have to send you the head in advance or is it exchange heads. Also hwo long will it take for you to install? as i will be driving to melbourne for this work and a total cost would be nice.
__________________
Engine; 351 Crank, 302 Rods, Custom Pistons, Blue Print & Balanced Bottom End, Crower Stage 5 Cam (Cam Specs), , CHI 3V Heads. ENGINE PIC HERE Body: XD Fairmont Ghia |
||
|
|
|
27-03-2005, 07:47 AM
|
#2 | ||
|
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
Spider .If that was that figure was from mdx dyno ...you would have got 140 on dyno dynamics dyno.My standard engine put out more than an au xr6 hp on the day. JonBays got 120 rwks and ran a 15.5 quarter mile.
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again 
Last edited by Stav; 27-03-2005 at 07:48 AM. |
||
|
|
|
|
27-03-2005, 07:51 AM
|
#3 | ||
|
Prince Of Darkness
Join Date: Dec 2004
Location: Gold Coast, Qld
Posts: 607
|
No that dyno was on a dyno dynamics dyno when i sent the dyno graph to JMM he said that the figure and the curves are all wrong so when suspect the head to be the problem.
__________________
Engine; 351 Crank, 302 Rods, Custom Pistons, Blue Print & Balanced Bottom End, Crower Stage 5 Cam (Cam Specs), , CHI 3V Heads. ENGINE PIC HERE Body: XD Fairmont Ghia |
||
|
|
|
|
27-03-2005, 07:25 PM
|
#4 | ||
|
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
Good luck with it champ.
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
|
||
|
|
|
|
27-03-2005, 07:45 PM
|
#5 | ||
|
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 12,083
|
Spider, probably worth a call to Jim and Brenden to get this all sorted out. Let us know how you go.
__________________
Older, wiser, poorer. Now in Euro-Trash. VW Coupe V6 4motion.
|
||
|
|
|
|
27-03-2005, 07:52 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
Why would the head be to blame?
Wanna swap for an EF XR6 head?
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. |
||
|
|
|
|
27-03-2005, 08:31 PM
|
#7 | ||
|
Prince Of Darkness
Join Date: Dec 2004
Location: Gold Coast, Qld
Posts: 607
|
Like i said i rang Brendon and talked to him for a good hour on the phone and ive found out why i didn't get he power reading i was suppose to LOL
__________________
Engine; 351 Crank, 302 Rods, Custom Pistons, Blue Print & Balanced Bottom End, Crower Stage 5 Cam (Cam Specs), , CHI 3V Heads. ENGINE PIC HERE Body: XD Fairmont Ghia |
||
|
|
|
|
28-03-2005, 02:14 PM
|
#8 | ||
|
Bear with a sore head
Join Date: Dec 2004
Location: Adelaide
Posts: 3,706
|
And the reason was?
|
||
|
|
|
|
28-03-2005, 04:09 PM
|
#9 | ||
|
Prince Of Darkness
Join Date: Dec 2004
Location: Gold Coast, Qld
Posts: 607
|
Stuffed Map, Stuffed Oxy, Stuffed Auto Gearbox, Cam not dialed in right, Wrong gasket on head, Stuffed throttle cable only letting the throttle body open 70% if that.
__________________
Engine; 351 Crank, 302 Rods, Custom Pistons, Blue Print & Balanced Bottom End, Crower Stage 5 Cam (Cam Specs), , CHI 3V Heads. ENGINE PIC HERE Body: XD Fairmont Ghia |
||
|
|
|
|
31-03-2005, 01:02 PM
|
#10 | ||
|
"THE" Workshop manager.
Join Date: Jan 2005
Location: Altona
Posts: 130
|
So is it running right now ?
__________________
Jim Mock Motorsport AME Albury carshow Horsepower Hero 2005 AME Adelaide carshow Horsepower Hero 2005 AME Shepparton carshow Horsepower Hero 2005 AME Melbourne Highest horsepower 6 turbo 2005 AME Melbourne Highest horsepower N/A 6 2005 All Ford nationals DYO 10.5 and over champion 2005 |
||
|
|
|
|
31-03-2005, 02:12 PM
|
#11 | |||
|
XB in parts...
Join Date: Dec 2004
Location: Sydney
Posts: 2,890
|
Quote:
__________________
Daily Driver 2019 Ford Escape...looking for XR6T's. |
|||
|
|
|
|
01-04-2005, 06:37 AM
|
#12 | ||
|
Prince Of Darkness
Join Date: Dec 2004
Location: Gold Coast, Qld
Posts: 607
|
Yes its running near right now but i want to go back to a e-series head and go the dev4 streetfighter
__________________
Engine; 351 Crank, 302 Rods, Custom Pistons, Blue Print & Balanced Bottom End, Crower Stage 5 Cam (Cam Specs), , CHI 3V Heads. ENGINE PIC HERE Body: XD Fairmont Ghia |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Streetfighter Setup
Hybrid Mode