power window switch

[Reaper8]

Hi all have had nothing but problems with my windows since ive had the car. new switches, new motors and had enough. has anyone done a switch change to something like a set of fg switches ect.

[TICKXR]

Hi All, strange issue with au ute power window.
Passenger side window works fine unless it is opened fully , then it will stop and nothing will make it move and go back up.
Pretty sure motor, switches, fuses etc not at fault because it I leave it come
try again the next day , window goes up and works fine , as long as I dont go
full down .
Seems like after at least 12 hrs is needed and all back to normal??
Any ideas appreciated

[mad2]

Originally Posted by Reaper8

Hi all have had nothing but problems with my windows since ive had the car. new switches, new motors and had enough. has anyone done a switch change to something like a set of fg switches ect.

Originally Posted by TICKXR

Hi All, strange issue with au ute power window.
Passenger side window works fine unless it is opened fully , then it will stop and nothing will make it move and go back up.
Pretty sure motor, switches, fuses etc not at fault because it I leave it come
try again the next day , window goes up and works fine , as long as I dont go
full down .
Seems like after at least 12 hrs is needed and all back to normal??
Any ideas appreciated

Hi. possibly the switch/es have a heap of carbon in them causing the issues?. they need to be cleaned & some carbon grease [? i think that's what it's called] applied to contacts [i never did it to the AU and havn't yet needed to with the BA/BF]. also the glass binding when going up/down can cause some issues. and yes i had issues in 'Ol yella [AU wagooon] with the switches.

[T3rminator]

My driver switch was playing up, unresponsive sometimes, then responsive again.

On a hunch, I removed all the pins from the connector socket, sprayed them with electronics parts cleaner, put them back in (make sure you remember which pin goes where!!...taking a photo helps), and the problem was fixed.

If you suspect its the switch itself, you can get them from ebay for like under $20. I've had 2 cheapies from ebay and they work fine.

Forget trying to open them up and clean the inside....I tried that once and all these little pieces fell on my lap, and I had no idea how to put them all back. :P



If you know what you are doing, you could try put them back. I couldn't get the buttons to click up or down no matter how I put them back!

[mad2]

Originally Posted by T3rminator

My driver switch was playing up, unresponsive sometimes, then responsive again.

On a hunch, I removed all the pins from the connector socket, sprayed them with electronics parts cleaner, put them back in (make sure you remember which pin goes where!!...taking a photo helps), and the problem was fixed.

If you suspect its the switch itself, you can get them from ebay for like under $20. I've had 2 cheapies from ebay and they work fine.

Forget trying to open them up and clean the inside....I tried that once and all these little pieces fell on my lap, and I had no idea how to put them all back. :P

image

If you know what you are doing, you could try put them back. I couldn't get the buttons to click up or down no matter how I put them back!

try the AU ones.......

[T3rminator]

Originally Posted by mad2

try the AU ones.......

AU switch housing looks different. How would you get them to sit on the BA door handle?

[chinamonty]

Originally Posted by T3rminator

My driver switch was playing up, unresponsive sometimes, then responsive again.

On a hunch, I removed all the pins from the connector socket, sprayed them with electronics parts cleaner, put them back in (make sure you remember which pin goes where!!...taking a photo helps), and the problem was fixed.

If you suspect its the switch itself, you can get them from ebay for like under $20. I've had 2 cheapies from ebay and they work fine.

Forget trying to open them up and clean the inside....I tried that once and all these little pieces fell on my lap, and I had no idea how to put them all back. :P

image

If you know what you are doing, you could try put them back. I couldn't get the buttons to click up or down no matter how I put them back!

Its not hard to put them in place. they pivot on the H brass part that sticks up from the pcb. The ends then have to touch the round silver pads so that gives you the orientation.

[chinamonty]

with AU window switches (not the main controller) they are fairly easy to fix. The problem they have is the nylon actuator wears. If this happens then just put a bad of model cement in the metal contact so it is built up a little. Otherwise just buy new ones - they are not expensive. I keep a rebuilt one in the glovebox for emergencies.

[Uncle_Ken]

AU's can fix anything