|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
|
|
12-10-2024, 02:05 PM
|
#1 | ||
|
Starter Motor
Join Date: Oct 2019
Posts: 3
|
The power antenna is not working In my au fairlane, I've tried putting in a new one but no luck. It seems like it's not getting a signal from the radio because the antenna dose work when connected to 12v. I've checked the fuses but they are all good. Any ideas? Oh It's still using the stock radio as well.
|
||
|
|
|
12-10-2024, 02:45 PM
|
#2 | ||
|
FG XR6 Ute & Sedan
 Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,518
|
The aerial relay in the body electronic module (BEM) may have failed or have dry joint on one or more relay pins (most often) or harness connectors. See https://fordforums.com.au/wsmpub/augx/Part%2015-8.html and https://www.fordmods.com/ford-techni...martsheild-d35 and the similar EL one at https://www.fordmods.com/ford-techni...-smartlock-d26 I would try opening up the BEM checking for dry joints on the relay pins and harness connectors on the solder side of the PCB inside and reflow the relay solder pads. See 15-8-35 of https://fordforums.com.au/wsmpub/augx/Part%2015-8.html for instruction on removing and replacing the BEM. No clues in the diagnostics at https://fordforums.com.au/wsmpub/augx/Part%2015-7.html
__________________
regards Blue |
||
|
|
|
|
12-10-2024, 03:50 PM
|
#3 | ||
|
FG XR6 Ute & Sedan
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,518
|
Wiring diagram is at https://fordforums.com.au/wsm/wire/a...html#page00009 Section 24-4-57
__________________
regards Blue |
||
|
|
|
Ford AU II fairlane power antenna
Hybrid Mode