Kenne Bell Supercharger News

[Theo@BluePower]

*** Kenne Bell Supercharger News ***

We have been able to add more value to our Kenne Bell blower kits for BA/F and FG 5.4L Boss engines. Not only have we been able to lower the price of the kit to $11,290 we have added more to the kit.. you now also get a set of Bosch 42Lbs Injectors, twin Throttle body rear Intake setup, Twin 60mm Throttle body (Same as on 315 Boss engines) 5' Mustang intake pipe.
The usual upgrades like Liquid cooled case $545, Polished head unit $600 and if you are the kind of guy or gal where enough aint always enough, then our "H" series $325 can all be added. Also we can supply XCAL3 Flash tuner with a start up tune so you can drive to your tune shop for $995

This offer is only valid exclusively through your Official Australian Kenne Bell Dealer, Bluepower!

[AGRO]

Just to add some more information to the above post.
These 5.4L Boss kits come complete with easy to follow fitting instructions for the end user. If you can 'swing a spanner' fairly well, then the kit will be a breeze to fit. The installation manual covers every detail to completion of the kit, including detailed photos.
This allows the end customer to save on installation costs, if they chose to fit the kit themselves.
Regards
AGRO.

[BOOSTEDGAZ]

Awesome!! Way to make an awesome kit even better. Have you guys got any KB Kits on the way for the 5.0 Miami's?? I am looking into the possibility of fitting a 2.8HLC set up to my 335 GT.

[Theo@BluePower]

We already have the kit and it can be made to fit the Aussie 5.0L. Its a pain that the US kit is not a straight bolt up to our engines like we hoped.
To fit this kit you will need a built a engine as the standard engine will not like a bigger blower.

Just give me a call and I will go through your options with you..

[BOOSTEDGAZ]

Thanks Theo. I will be in touch.

[FrogXA]

Originally Posted by AGRO

Just to add some more information to the above post.
These 5.4L Boss kits come complete with easy to follow fitting instructions for the end user. If you can 'swing a spanner' fairly well, then the kit will be a breeze to fit. The installation manual covers every detail to completion of the kit, including detailed photos.
This allows the end customer to save on installation costs, if they chose to fit the kit themselves.
Regards
AGRO.

I can vouch for this. I'm pretty handy with a spanner but not a tradesman. Installed my kit by myself using the supplied installation instructions which were very well detailed with photos as AGRO says. The few questions I had were answered promptly by Theo on the phone.
Great support, seeing I bought this kit new, unused from another forum member and not from Bluepower direct.

[superpursuit83]

Is the kit on offer a 2.6 or 2.8?

[Theo@BluePower]

Its for the 2.6L kit..
The 2.8L is "Race only" kit and not suited to street application due to firewall modification's that will need to be done.

[Tyre Licker]

Originally Posted by Theo@BluePower

Its for the 2.6L kit..
The 2.8L is "Race only" kit and not suited to street application due to firewall modification's that will need to be done.

Hey anymore news on 3.6 kit

[Bluepower]

Originally Posted by Tyre Licker

Hey anymore news on 3.6 kit

I know nothing of a 3.6 kit......Sorry

[tex]

Holy crap, that's a sharp price structure!

[SIMBAD]

What does the "H" series include and what are the benefits of it?

[Theo@BluePower]

"H" series Kenne Bell blowers are only good for over 16 Psi.. there is only a hand full on street cars and only for a forged motor.

[SIMBAD]

Ok cool, now how to pass this through the minister of finance lol