|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-05-2022, 01:15 PM
|
#1 | ||
|
Starter Motor
Join Date: Apr 2022
Posts: 1
|
Hello everyone
I'm new to the forum: My son brought a second hand motor with low*km. Was advised the motor was ok from the person we brought it off!!! Hmm, mm So we replace his engine (that had a cracked cylinder liner) with the second hand one, but notice after the fact we put it in, that the timing looked out. So I found TDC and noted that the timing marks were not lining up, intake side was TDC and the exhaust was about 3 o'clock. So we took out the spark plugs and check the compression and couldn't get a reading. Question: What would be the check or step to take? Is it to put a new timing belt, tensioner and seals and reline timing? Then do compression test?? Cheers |
||
|
|
Xr5 turbo timing
Hybrid Mode