Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Mondeo

Reply
 
Thread Tools Display Modes
Old 23-06-2018, 10:58 AM   #1
evanlau
Starter Motor
 
Join Date: Jun 2018
Posts: 22
Default Mondeo Trend MY2018.25 - Digital speedo & build quality

Hi all,

Got a new Mondeo Trend petrol hatch last month. Overall, so far so good - great car to drive and most of the tech works well.

A few questions to those in the know:

1. Digital speedo - When I test drove the Titanium (they couldn't find a Trend), I asked about the major differences with the Trend. They didn't tell me about the lack of a digital speedo. In fact, they didn't even know about it until I asked during delivery! I certainly know the car has the details as when you start in Test mode you can get to a digital speedo readout, so I'm assuming it's just a feature they need to enable in the instrument cluster software. Has anyone had any luck on this?

2. Build quality - Inside seems okay so far, however I have noticed slight alignment issues with the doors and trims on the outside, e.g. the chrome trims (between body and window) do not line up all the way down each side, plus when shut the rear bottom of one of the rear doors doesn't line up with the adjacent rear quarter panel. It's minor, but noticeable. I'm wondering if it's worth asking them to address it in the free service. I'm worried they might try to fix it but make it worse! Also, is this 'acceptable' build quality?

3. Fuel economy - The average on the trip computer doesn't match (lower than) my calculated one when filling up. In Test mode, there is an AFE bias which I think adds a fudge factor to the calculation. Why would it do this? If the purpose is to make fuel consumption look lower than actual, I would have thought this would at best be misleading, at worst be against consumer law. Anyway, overall the car is not very fuel efficient even when driving it in an economical manner. So far I've achieved about 12-14L/100km even with 50% freeway mileage.
evanlau is offline   Reply With Quote Multi-Quote with this Post
Old 23-06-2018, 01:01 PM   #2
kevino
FF.Com.Au Hardcore
 
Join Date: Dec 2009
Posts: 3,626
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

RE Fuel economy.
My focus 2015 trip computer 5.3 in in reality 6 when you fill and make the division between kilometres travelled and fuel used.
Might be a common Ford issue.
kevino is offline   Reply With Quote Multi-Quote with this Post
Old 23-06-2018, 01:03 PM   #3
cobrin
Challenge Accepted!
 
cobrin's Avatar
 
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

3. it's an estimation on many factors calculated by the ecu, it will never be actual, so take all those results with a grain of salt. This isn't new it's always been like that, how can it know actual usage on many parameters and injector times and inbuilt allowances like actual tyre circumference, actual distance driven...it can't is all. My folks 2015 MD Titanium looks to average 8.2-9.2L/100km or less when HWY driving is included. Empty vehicle, one to two people usually. On the HWY it goes well he's had it down to 6.1-6.6L/100km, it's flat driving 80 to 100kph. City can reach 9.5L/100kms and up.
__________________
Undecided replacement...
[SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD]
cobrin is offline   Reply With Quote Multi-Quote with this Post
Old 23-06-2018, 04:24 PM   #4
Mercury Bullet
FF.Com.Au Hardcore
 
Join Date: Feb 2008
Location: WA
Posts: 3,705
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

2. They will arrange for you to go to a panel beater at their expense.
Ford service dept aren't allowed to touch panels under warranty.

The drivers door in my falcon dropped a mm or two and they sent me off to a panel shop. 5 minutes work for them and I haven't had a problem since.

Don't hold your breath on the Speedo. Ethically it's a bit of a minefield but ultimately that's what they use to upsell you into a more expensive model. By all means ask.
__________________
www.bseries.com.au/mercurybullet

2016 Falcon XR8. Powered by the legend that is - David Winter.
XC Cobra #181.
1985 Mack Superliner, CAT 3408, 24 speed Allison.

Last edited by Mercury Bullet; 23-06-2018 at 04:31 PM.
Mercury Bullet is offline   Reply With Quote Multi-Quote with this Post
Old 23-06-2018, 04:46 PM   #5
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

The actual calculation on mine is approx. 0.4l/100km every tank without fail. Quite annoying.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 23-06-2018, 06:37 PM   #6
DFB FGXR6
Donating Member
Donating Member3
 
DFB FGXR6's Avatar
 
Join Date: May 2008
Posts: 12,659
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For the excellent car-care guide 
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Quote:
Originally Posted by evanlau View Post
Hi all,

2. Build quality - Inside seems okay so far, however I have noticed slight alignment issues with the doors and trims on the outside, e.g. the chrome trims (between body and window) do not line up all the way down each side, plus when shut the rear bottom of one of the rear doors doesn't line up with the adjacent rear quarter panel. It's minor, but noticeable. I'm wondering if it's worth asking them to address it in the free service. I'm worried they might try to fix it but make it worse! Also, is this 'acceptable' build quality?
The media commented on poor panel alignment when the current generation Mondeo went on sale. Seems par for course.
Couldn't be any worse than the frankly pitiful alignment issues that the Mustang suffers for. Remind me how long Ford have been making cars?
__________________
PX MK II Ranger
FG XR6
FG X XR8
Mustang GT

T3 TS50 - gone but not forgotten
DFB FGXR6 is online now   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 25-06-2018, 09:57 AM   #7
evanlau
Starter Motor
 
Join Date: Jun 2018
Posts: 22
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Thanks all. Sounds like the digital speedo and build quality are 'as-is', i.e. nothing much you can do about it. Will keep an eye out on fuel economy as it's early days. I'll post any updates after the free first service next month if there's anything interesting..
evanlau is offline   Reply With Quote Multi-Quote with this Post
Old 25-06-2018, 07:00 PM   #8
NX74205
FF.Com.Au Hardcore
 
NX74205's Avatar
 
Join Date: Oct 2008
Location: Perth, WA
Posts: 1,311
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Quote:
Originally Posted by evanlau View Post
2. Build quality - Inside seems okay so far, however I have noticed slight alignment issues with the doors and trims on the outside, e.g. the chrome trims (between body and window) do not line up all the way down each side, plus when shut the rear bottom of one of the rear doors doesn't line up with the adjacent rear quarter panel. It's minor, but noticeable. I'm wondering if it's worth asking them to address it in the free service. I'm worried they might try to fix it but make it worse! Also, is this 'acceptable' build quality?
Mine has alignment issues where the tailgate, taillights and rear bumper meet. It has been to a panel shop three times but it's still not perfect. Just millimeters in it, but noticeable.
__________________
Current car:
2016 Ford MD Mondeo Titanium EcoBoost (2016-)
Previous cars:
2005 Ford BF Fairmont (2006-2019)
1989 Ford EA Falcon GL (2000-2007)
1982 Ford KA Laser Ghia (1999-2000)
NX74205 is offline   Reply With Quote Multi-Quote with this Post
Old 06-08-2018, 11:59 AM   #9
evanlau
Starter Motor
 
Join Date: Jun 2018
Posts: 22
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Just for those that are interested, I took the Mondeo in for the free 'peace of mind' service last week. Result is as expected:

1. Fuel consumption of 10-11 l/100km is 'as expected'. I was told if I took it on a long drive to Geelong it will be lower (thanks).

2. Build quality is within 'acceptable' limits/margins. I was shown another brand new Mondeo which had similar issues, and was told they didn't want to muck around with the doors in case they made things 'worse'. So there was 'nothing we can do' unfortunately.

So that's that. I've uploaded a few photos here just to highlight the door panel alignment issues. I know there are those where this would not be acceptable and would drive them crazy, so I guess the message is beware....

Actually with the door where the bottom corner juts out a little, they also tried to tell me that someone probably damaged it post delivery....
Attached Images
File Type: jpg IMG_0115.jpg (11.1 KB, 75 views)
File Type: jpg IMG_0116.jpg (108.9 KB, 73 views)
File Type: jpg IMG_0117.jpg (84.6 KB, 72 views)
evanlau is offline   Reply With Quote Multi-Quote with this Post
Old 06-08-2018, 01:58 PM   #10
whitelion65
FF.Com.Au Hardcore
 
whitelion65's Avatar
 
Join Date: Apr 2012
Posts: 976
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

1 I don't know why the preoccupation with digital speed readout comes from, but if you look at the fine print in brochures etc, there will be a disclaimer that features can change without notice.
2 Doesn't look too good from the pics, but I think you've lost any bargaining power by accepting the condition of the vehicle when you drove it off the dealers premises.
3 The fuel consumption isn't calculated by a complex algorithm (That's the DTE, which can change fairly rapidly, according to recent historical consumption). Average consumption is calculated by distance traveled / fuel used. My MC Mondeo diesel is incredibly accurate (I have long term records), but my LZ Focus uses around 10% more than indicated. In my VY Commodore, I could manually adjust the figure by going through the set-up menu. I must look into doing the same for the Focus.
I would approach the dealer principal about the panel fit issues. It wouldn't cost much for them to rectify. You've nothing to lose by having another go!!
Good luck!
__________________
Steve
Current rides
2012 Mondeo Titanium wagon (TDCI)
Moondust silver
2016 Focus Trend, 1.5ecoboost, 6sp manual.
Frozen white

Previous
2004 Berlina Wagon (LS1) Vespers Blue
1995 Camry 2.2, white
1971 Ford Fairmont wagon 302w, C4 Polar white
1971 TC Cortina, 2L 4sp, Ermine white
whitelion65 is offline   Reply With Quote Multi-Quote with this Post
Old 06-08-2018, 05:10 PM   #11
Macster
Starter Motor
 
Join Date: Aug 2018
Posts: 7
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

That pictured door alignment would drive me nuts too. You have a Ford warranty so try asking another dealer. The Epping guys are pretty good in Melbourne.
Macster is offline   Reply With Quote Multi-Quote with this Post
Old 07-08-2018, 07:57 AM   #12
evanlau
Starter Motor
 
Join Date: Jun 2018
Posts: 22
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Yes it's true I could keep trying to get it fixed, but don't really have the inclination or energy to do so. And yes, I'm playing right into the hands of their strategy to say no enough times that 95% of people don't pursue it.

The message is if you are someone who's OCD and needs things 100% right, but don't have the time/energy to keep bringing it back or bringing it elsewhere, then look beyond the blue oval.

Otherwise it's a good car, which could have been great by a single factor alone - that is, build quality. But I entered with (relatively) low expectations, which were met.
evanlau is offline   Reply With Quote Multi-Quote with this Post
Old 05-09-2018, 03:56 PM   #13
NX74205
FF.Com.Au Hardcore
 
NX74205's Avatar
 
Join Date: Oct 2008
Location: Perth, WA
Posts: 1,311
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Evan - saw your post in the other thread saying that your car is with a panel beater now. Please let us know how that goes. As an owner of a Mondeo with dodgy panel alignment too (in my case, the tailgate/tail-light/rear bumper alignment), I'd be interested in the results.
__________________
Current car:
2016 Ford MD Mondeo Titanium EcoBoost (2016-)
Previous cars:
2005 Ford BF Fairmont (2006-2019)
1989 Ford EA Falcon GL (2000-2007)
1982 Ford KA Laser Ghia (1999-2000)
NX74205 is offline   Reply With Quote Multi-Quote with this Post
Old 12-09-2018, 04:20 PM   #14
evanlau
Starter Motor
 
Join Date: Jun 2018
Posts: 22
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

I got the car back on the weekend. The doors are vastly improved, though not 100% as expected of a new car in this day and age. Talking to the panel beater, they can't get it 100% and ironically can get a better result if there was an accident and you needed new doors/panels.

There wasn't much improvement in my tailgate/tail-light/rear bumper area. On mine the tailgate itself looks aligned to the surroundings when shut, but the lights on it don't fully line up with the rear side lights when closed. Can you share what yours looks like?
evanlau is offline   Reply With Quote Multi-Quote with this Post
Old 12-09-2018, 07:55 PM   #15
NX74205
FF.Com.Au Hardcore
 
NX74205's Avatar
 
Join Date: Oct 2008
Location: Perth, WA
Posts: 1,311
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Quote:
Originally Posted by evanlau View Post
Can you share what yours looks like?




Noticeable gap under the right rear tail light; neither tail light lines up perfectly. It has been to the panel beater three times, and have been advised that this is the best they can do.
__________________
Current car:
2016 Ford MD Mondeo Titanium EcoBoost (2016-)
Previous cars:
2005 Ford BF Fairmont (2006-2019)
1989 Ford EA Falcon GL (2000-2007)
1982 Ford KA Laser Ghia (1999-2000)
NX74205 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 13-09-2018, 07:31 AM   #16
evanlau
Starter Motor
 
Join Date: Jun 2018
Posts: 22
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

When I first looked at those photos, I had to do a double take as I thought I was looking at my car! I've attached mine here. These are ones I took before it went to the panel beater. Since it's been back, I can't seem to tell if it's any different, so either they couldn't or didn't do much with it. It's as if the tailgate isn't meant to actually line up. At least my doors are much better now....
Attached Images
File Type: jpg boot right.jpg (118.2 KB, 24 views)
File Type: jpg boot left.jpg (102.6 KB, 26 views)
evanlau is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 13-09-2018, 07:40 PM   #17
rxj
Regular Member
 
rxj's Avatar
 
Join Date: Aug 2005
Location: Victoria
Posts: 266
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Quote:
Originally Posted by evanlau View Post
When I first looked at those photos, I had to do a double take as I thought I was looking at my car! I've attached mine here. These are ones I took before it went to the panel beater. Since it's been back, I can't seem to tell if it's any different, so either they couldn't or didn't do much with it. It's as if the tailgate isn't meant to actually line up. At least my doors are much better now....
That’s disappointing. I have just traded my MC Mondeo for a brand new MD Mondeo in Frozen White. I will be checking my car on pickup and hope I don’t have similar issues.

Cheers, rxj
__________________
1997 EL Fairmont
2003 BA Fairmont Ghia v8
2007 BF FPV F6 Typhoon R-Spec
2008 FG G6E Turbo
2009 SY II Territory Ghia AWD
2012 MC Mondeo Titanium Ecoboost
2018 MD Mondeo Titanium Ecoboost (Current)
rxj is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 13-09-2018, 09:55 PM   #18
Smoke Pursuit
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 22,922
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: DASH/bfiipursuit has been alot of help over the years I have frequented this forum, lots of thoughtful and informed posts, very much a valued contributor. 
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Same here mine is a 17.5. Looks all good to me.
__________________
2022 RAM Laramie 5.7
2023.50 Ranger Wildtrak 3.0 V6 Premium Pack
2024 Everest Sport 3.0 V6 Touring Pack
2024.50 Mustang Darkhorse 6M Blue Ember + Appearance pack ETA Jan 25.
Smoke Pursuit is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 14-09-2018, 12:01 PM   #19
cobrin
Challenge Accepted!
 
cobrin's Avatar
 
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

2015 only has a slight off centre rear hatch the rest are on point. Though yesterday the battery went flat as in completely dead (hasn't been used for 4 or 5 days, this isn't the first time this has happened and I though it were because a dashcam were connected but definitely not that this time.
__________________
Undecided replacement...
[SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD]
cobrin is offline   Reply With Quote Multi-Quote with this Post
Old 14-09-2018, 12:45 PM   #20
evanlau
Starter Motor
 
Join Date: Jun 2018
Posts: 22
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

For those that have no issues, that's great! I've had a look at all the Mondeos (both hatch and wagon) I see on the road and in carparks, and most of them have panel alignment issues.

If you're getting one soon, fingers crossed..!
evanlau is offline   Reply With Quote Multi-Quote with this Post
Old 24-09-2018, 08:11 PM   #21
rxj
Regular Member
 
rxj's Avatar
 
Join Date: Aug 2005
Location: Victoria
Posts: 266
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Picked up my new MD Mondeo today. I was lucky no panel alignment issues, but have very small dots that have etched into the clear coat on the metal panels in some places, but can only been seen in bright light. I need to see if I can address this when I have time.
__________________
1997 EL Fairmont
2003 BA Fairmont Ghia v8
2007 BF FPV F6 Typhoon R-Spec
2008 FG G6E Turbo
2009 SY II Territory Ghia AWD
2012 MC Mondeo Titanium Ecoboost
2018 MD Mondeo Titanium Ecoboost (Current)
rxj is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 25-09-2018, 11:02 AM   #22
evanlau
Starter Motor
 
Join Date: Jun 2018
Posts: 22
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

If no one has coined it before, I'm claiming the phrase "panel alignment envy".
evanlau is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 11-04-2019, 07:15 PM   #23
thebigd
Regular Member
 
Join Date: Oct 2009
Location: 4074
Posts: 144
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Re no digital speedo on the Trend and Ambiante models. I found this on a UK forum. It was added using Forscan. Anyone have any experience with Forscan over here ?

Last edited by thebigd; 06-06-2019 at 06:24 PM.
thebigd is offline   Reply With Quote Multi-Quote with this Post
Old 11-04-2019, 09:37 PM   #24
Smoke Pursuit
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 22,922
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: DASH/bfiipursuit has been alot of help over the years I have frequented this forum, lots of thoughtful and informed posts, very much a valued contributor. 
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Quote:
Originally Posted by thebigd View Post
Re no digital speedo on the Trend and Ambiante models. I found this on a UK forum. It was added using Forscan. Anyone have any experience with Forscan over here ?
Yes I do.
__________________
2022 RAM Laramie 5.7
2023.50 Ranger Wildtrak 3.0 V6 Premium Pack
2024 Everest Sport 3.0 V6 Touring Pack
2024.50 Mustang Darkhorse 6M Blue Ember + Appearance pack ETA Jan 25.
Smoke Pursuit is offline   Reply With Quote Multi-Quote with this Post
Old 01-08-2019, 02:23 PM   #25
thebigd
Regular Member
 
Join Date: Oct 2009
Location: 4074
Posts: 144
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Just added the digital speedo to my new Trend Hatch. I got some help, and found that the function was already in there, but not activated. Stoked ! Not sure why Ford wouldn't have this as standard, as it does with 17.5 on Titanium.
IMG_4002.JPG
thebigd is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 01-08-2019, 05:05 PM   #26
joolz
FF.Com.Au Hardcore
 
Join Date: Jan 2006
Posts: 1,119
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

My wife has the same model. One thing I don't like is the 5km/h increments for the cruise control. I'm also surprised the digital speedo isn't standard.
joolz is offline   Reply With Quote Multi-Quote with this Post
Old 01-08-2019, 05:23 PM   #27
thebigd
Regular Member
 
Join Date: Oct 2009
Location: 4074
Posts: 144
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Quote:
Originally Posted by joolz View Post
My wife has the same model. One thing I don't like is the 5km/h increments for the cruise control. I'm also surprised the digital speedo isn't standard.
Agree with your cruise control comment, although the digital speedo now makes it easier to lock in the exact speed you want.
thebigd is offline   Reply With Quote Multi-Quote with this Post
Old 06-08-2019, 05:45 PM   #28
evanlau
Starter Motor
 
Join Date: Jun 2018
Posts: 22
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Used Forscan + an adaptor to enable the digital speedo on the Trend hatch. Pretty simple. There are other features you can play around with and enable.

Now, if only there is a feature called 'build quality' which you can toggle to 'average' or 'high' instead of 'low'....
evanlau is offline   Reply With Quote Multi-Quote with this Post
Old 07-08-2019, 02:44 PM   #29
evanlau
Starter Motor
 
Join Date: Jun 2018
Posts: 22
Default Re: Mondeo Trend MY2018.25 - Digital speedo & build quality

Yes, I had to get used to the 5km/h increments when I first drove the car. Even without a digital speedo, you could set it to a speed in between those increments - you just had to set it to the nearest 5km/h (lower or higher), then manually get it to the speed you want (accelerate higher or cruise lower), then press set again. I got really good at reading the analogue speedo, but now with the digital speedo enable it's much easier..

On a (hopefully) final note for this thread, I had the Mondeo in for first year service recently. Got the dealer to look at a bunch of rattles that developed (speaker in front door, dashboard, rear seat belt assembly). They fixed them the best they could, though not 100%. Very common apparently, and dealers would be lucky to get $60 for the hours of work they put into it..

Last edited by evanlau; 07-08-2019 at 02:50 PM.
evanlau is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 05:52 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL