|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
15-04-2024, 10:56 PM | #1 | ||
Starter Motor
Join Date: Mar 2024
Posts: 6
|
Hi All,
I have a 2011 LW Focus (187000 km) with dura torq turbo diesel that needs a new DPF. Wondering if anyone has a lead on where to get one without paying through the nose. Sydney pref but freight isn't too hard to organise these days. David |
||
16-04-2024, 03:56 PM | #3 | |||
Starter Motor
Join Date: Mar 2024
Posts: 6
|
Quote:
A new one delivered to my door is about $950. Having said that I did some internet searching last night and discovered the problem might be a non-operating vaporiser preventing a regen. Will follow that up first, will remove it and have a look when I get a chance next. David |
|||
2 users like this post: |
18-10-2024, 04:12 PM | #4 | ||
Starter Motor
Join Date: Mar 2024
Posts: 6
|
For anyone looking for this or a similar solution to this problem in the future, my solution was to clean it myself. In sort I took the DPF out (had to cut the exhaust pipe), cleaned it with a pressure washer until the water came out clean, let it dry for a week, then put it back in. It took a few drives for the % soot loading value in the scanner to drop, but its now around 20%. Big difference.
The hardest bit was getting a 60mm band clamp to allow me to re-join the DPF to the old exhaust. These seem to be common in 2.25inch (57mm) and 2.5inch (63mm), and neither of these fit. FYI David |
||