![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | ||
Regular Member
Join Date: Jan 2012
Location: ballina
Posts: 30
|
hi guys can anyone help we have a 92 laser when idling its fine when driving along in drive the car will sometimes revs fro 2000 to 4500 canany one help with the probs ,
cheers jim |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 796
|
Manual, I guess? I would be looking at all of the air intake system for split hoses and loose clamps. Is the air cleaner element good? Next I would inspect every vacuum line including the one going to the brake booster. listen to the brake booster. It may have some hissing going on. That indicates a leaking diphragm...not good. On the smaller vac lines look for hardened and split or loose hoses and replace them. Not expensive. Yours is a carby model? Water in fuel can be a problem as well. If you are running E10, that reduces the risk posed by water contamination. But I personally would not run E10 all the time. Ford recommends that Telstars around the 1993-4 should not use E10 due to problems it causes in the Telstar fuel system. I don't think that applies to Lasers.
|
||
![]() |
![]() ![]() |