|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
Genuine Ford Parts A forum for the purchase of genuine Ford parts via an AFF member. |
|
Thread Tools | Display Modes |
|
07-01-2022, 01:48 PM | #1 | ||
Starter Motor
Join Date: Jan 2022
Posts: 7
|
Hi Everyone.
Hoping someone can help. Trying to chase down the original centre wheel hub caps for the above model. They are the larger dish type with the ghia symbol in the centre and have an Allen key screw to hold them.on to the wheel. I have attached a picture of one. I am after 1 or more. Cheers Rick 20220107_131645.jpg |
||
07-01-2022, 02:18 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,698
|
2002 can be AU or BA Fairlane and they are both different. Which one do you have and also if you can see the part number on the back, that will also help..
|
||
07-01-2022, 02:51 PM | #3 | ||
Starter Motor
Join Date: Jan 2022
Posts: 7
|
It is the au 2 fairlane sportsman and is the same as the one have added in the picture. Hope this helps. The BA only had the small centre hub caps which covered only the hub not the studs as the ones I need.
|
||
07-01-2022, 04:52 PM | #4 | ||
Donating Member
Join Date: Jun 2007
Location: Checking out soft furnishings....
Posts: 8,833
|
The BA LTD also has the same caps, but, instead of a Ghia badge in the centre, it’s an LTD one.
__________________
Proud owner of the ugliest Ford ever made |
||
This user likes this post: |
07-01-2022, 04:50 PM | #5 | ||
Donating Member
Join Date: Jun 2007
Location: Checking out soft furnishings....
Posts: 8,833
|
Keep eye on EBay, they go for $150 to $200 a pop on there
__________________
Proud owner of the ugliest Ford ever made |
||
07-01-2022, 10:35 PM | #6 | ||
Starter Motor
Join Date: Jan 2022
Posts: 7
|
|
||
07-01-2022, 10:37 PM | #7 | ||
Donating Member
Join Date: Jun 2007
Location: Checking out soft furnishings....
Posts: 8,833
|
The other thing to keep in mind is that where the screw, screws in, the plastic is usually damaged. You can epoxy a washer behind onto the cap so you can screw it in and wont lose the cap.
__________________
Proud owner of the ugliest Ford ever made |
||
07-01-2022, 10:44 PM | #8 | ||
Starter Motor
Join Date: Jan 2022
Posts: 7
|
Thanks, have done that as well. But lost one while travelling. Just want to get one back so I have all 4 again.
|
||
07-01-2022, 11:23 PM | #9 | ||
HUGH JARSE
Join Date: May 2005
Location: Yap-Hoon
Posts: 21,869
|
I may have one or two
I'll check the shed tomorrow If I forget PM me |
||
This user likes this post: |