Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 10-05-2007, 03:28 PM   #1
andyxa
Starter Motor
 
Join Date: Jan 2006
Posts: 8
Default 93 telstar failing

Hi got a 93 v6 telstar and is doing the same as all telstars that year in that it will stop while driving . once you try to restart away it goes . Heard it may be a common problem for some other 93 cars. No one can find out why, ive replaced all the sensors , the distributor has been reconditioned twice ( once by me and once by the previous owner who on sold the problem to me ) The ford dealers dont know . Does any one know how to fix it ? ive put test lights to the distributor and petrol pump and they are fine, new air intake valve tried another ECU im at a loss Thanks Rob

andyxa is offline   Reply With Quote Multi-Quote with this Post
Old 10-05-2007, 04:25 PM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

get good bolt on battery terminals for each side of the battery
recheck that the earth to the body is clean and corrosion free

if the car has an imobiliser that is where the problem usually is

coil can be the fault alone other cause is the pins in the connection blocks
break/or the wire to them inside has broken

only other way is to trace the power circuit and replace the wiring if found weak
replace the cars wiring loom front section
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 11-05-2007, 05:43 PM   #3
andyxa
Starter Motor
 
Join Date: Jan 2006
Posts: 8
Default 93 Telstar

thanks for the advise ive already replaced the coil and the car doesnt have an imobiliser so will follow up on the other points. They seem very valid for a car that age .Thanks Rob
andyxa is offline   Reply With Quote Multi-Quote with this Post
Old 11-05-2007, 07:53 PM   #4
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

also check draw on starter motor alternator and fusable links

if there is a fuse box under the bonnet undo the unit and look underneath for corrosion/faults on all the wiring connections not seen
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 11:54 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL