Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 11-07-2024, 06:47 PM   #1
Fatbob103
Regular Member
 
Join Date: Feb 2024
Posts: 58
Default Converting Air Con to Hychill.

Howdy

Replacing the aircon compressor on my patrol so will need to have it regassed.

Thinking of doing the change over to hychill so I can do it myself as I can get the gas and charge hose for $130.

Anyone done it before and have any tips?

Cheers
Fatbob103 is offline   Reply With Quote Multi-Quote with this Post
Old 11-07-2024, 06:58 PM   #2
cs123
Donating Member
Donating Member3
 
cs123's Avatar
 
Join Date: Jan 2005
Location: Morayfield
Posts: 28,142
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Can't think of anyone more deserving. Russ Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For all the technical support behind the scenes. Tech Writer: Recognition for the technical writers of AFF - Issue reason: Technical submission 
Default Re: Converting Air Con to Hychill.

Yes, have done it.

One thing to consider is the suction hose. Hychill have an article on reduced barier suction hose leakage. Hychill recommend replacing these hoses. Also do the o rings too.

Perhaps as a 1 off it won't be cheaper. You need a vacuum pump, manifold set, scales etc. Purchasing them will come to more than getting a regas.
__________________
I love Holdens....
cs123 is online now   Reply With Quote Multi-Quote with this Post
Old 11-07-2024, 09:37 PM   #3
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,549
Default Re: Converting Air Con to Hychill.

Quote:
Originally Posted by Fatbob103 View Post
Howdy

Replacing the aircon compressor on my patrol so will need to have it regassed.

Thinking of doing the change over to hychill so I can do it myself as I can get the gas and charge hose for $130.

Anyone done it before and have any tips?

Cheers
Have done it on my own cars and a couple customers, can recommend, cools better than R134a,

First car I did was my LV Focus, that thing was terrible typical Euro junk, above 30 degrees ambient temps you'd be lucky to get 17 out the vents.

Gassed it up with Hychill and 1.6 degrees out the vents:





30% charge by weight compared to R134a, probably not a concern on a Patrol but it wont work on shitful Euros using pressures to control the AC output as it operates at significantly lower pressures than R134a.

Don't bother buying the gear, just find a local workshop who does hychill I got a set of charge scales on sale recently and those alone were $220.

Did it in my EF as well, 0.7C out the center vents.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 11-07-2024, 10:09 PM   #4
Fatbob103
Regular Member
 
Join Date: Feb 2024
Posts: 58
Default Re: Converting Air Con to Hychill.

Quote:
Originally Posted by Franco Cozzo View Post
Have done it on my own cars and a couple customers, can recommend, cools better than R134a,

First car I did was my LV Focus, that thing was terrible typical Euro junk, above 30 degrees ambient temps you'd be lucky to get 17 out the vents.

Gassed it up with Hychill and 1.6 degrees out the vents:

image

image

30% charge by weight compared to R134a, probably not a concern on a Patrol but it wont work on shitful Euros using pressures to control the AC output as it operates at significantly lower pressures than R134a.

Don't bother buying the gear, just find a local workshop who does hychill I got a set of charge scales on sale recently and those alone were $220.

Did it in my EF as well, 0.7C out the center vents.
You interested in a ca$hy Franco?
Fatbob103 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 11-07-2024, 10:10 PM   #5
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,549
Default Re: Converting Air Con to Hychill.

Quote:
Originally Posted by Fatbob103 View Post
You interested in a ca$hy Franco?
I don't have a vac pump unfortunately, I've got the gauges and the scales, the vac pump is the next piece of the puzzle, I'm slowly piecing together all the kit to do it again

You need to pull the system into a vacuum for a while, then let it sit to see if it maintains it before you charge it.

You'll be able to get it done for around $200-$250 I reckon, its just a challenge finding a workshop that will use it because there's was a huge scare campaign on behalf of DuPont who has the licencing for R134a to scare people off using alternatives (that work way better and aren't under some ridiculous licencing system courtesy of the retards at ARC).

TaT which is a local automotive aftermarket group also carried on about flammable refrigerants, but both TaT and DuPont seem to be rather quiet about their flammable replacement for R134a - R1234yf.

If you contact HyChill they'll be able to put you onto someone they know who uses it, they used to be fairly active on the internet trying to dispell propaganda spread about their product.

Last edited by Franco Cozzo; 11-07-2024 at 10:21 PM.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:02 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL