BA BF FG 328mm Rear Brake Upgrade options

[FLOORED]

We have had a lot of inquiries about the 328mm vented PBR rear upgrades which have the larger rear disc and larger rear pbr caliper on the BA BF FG model Fords and have put some packages here for you.
These kits are suitable for the rear of sedans,wagons and utes and are better paired with a 322mm or larger front brake kit.We can sell the kits less the hoses or with and also have options with RDA plain or slotted and dimpled or DBA plain,T2 or T3 rotors and many pad choices from street to strip.
Prices of the various kit combo's we do have no hoses or right up to everything from $350 up to a full complete kit for $1100.

Example of kits below
One option is to run the DBA T3 rear 328mm vented and slotted disc rotor with the red PBR caliper along with braided lines and brake pads at about $995 a kit. (this kit is pictured)
Another option is our cheapest and that is plain un slotted rear rotors with std street pads and red calipers with no hoses from $350

Available now and only whilst stock is available
$995 kit is pictured

[Cable]

Hi Matt

Re. the 328 upgrade, im looking at the callipers, pads and T2 rotors. Also can I use my existing lines?
Just after a price and if you have in stock as I can pick up.

Thanks for your time
Jase

[FormulaFG]

Do those calipers only come in red?

[FLOORED]

Originally Posted by FormulaFG

Do those calipers only come in red?

Yes only red

[03 GHIA]

How much would it be for the calipers, RDA dimple/slotted rotors and a decent street pad such as HPX or similar alternative posted to 2777?
Don't need lines as I've just bought and fitted a set of Goodridge brake line from you (great quality too!) I assume they would fit fine with the round banjo from the solid rear rotor caliper?

Is it a noticeably better setup? Have only recently replaced rear discs and pads in standard size, so a bit hesitant to blow more money and replace near new items. Should have gone larger at the start

[FLOORED]

Originally Posted by 03 GHIA

How much would it be for the calipers, RDA dimple/slotted rotors and a decent street pad such as HPX or similar alternative posted to 2777?
Don't need lines as I've just bought and fitted a set of Goodridge brake line from you (great quality too!) I assume they would fit fine with the round banjo from the solid rear rotor caliper?

Is it a noticeably better setup? Have only recently replaced rear discs and pads in standard size, so a bit hesitant to blow more money and replace near new items. Should have gone larger at the start

Seen this so many times but can quote you.
328mm Rear RDA S/D and red pbr calipers with HPX pads and delivery to 2777 is $545

[phantom_87]

How much for the calipers only. I just got the 6/4 brembo kit off you for my ba but unfortunately the rear rims dont clear the brakes.
Ill keep the 4 pistons aside for my next wheel change so ill put the pbr on for now until then

[dead_man00124]

Price with postage to 3047

Calipers braided lines pads and rda rotors?

Will b paired to 6 pot brembos

Sent from my LG-H340 using Tapatalk

[FLOORED]

Originally Posted by dead_man00124

Price with postage to 3047

Calipers braided lines pads and rda rotors?

Will b paired to 6 pot brembos

Sent from my LG-H340 using Tapatalk

Should be about $720 just depends on what pad you want i only quoted std street use.
I have quoted RDA slotted and dimpled and that you car is a sedan with traction control. If you have anything different the price may change so you could spend $720 or up to $850 with freight.

Originally Posted by phantom_87

How much for the calipers only. I just got the 6/4 brembo kit off you for my ba but unfortunately the rear rims dont clear the brakes.
Ill keep the 4 pistons aside for my next wheel change so ill put the pbr on for now until then

Lets us know how you go with the wheels

[dead_man00124]

Hi its for an AU s1 ghia so traction control& irs

Sent from my LG-H340 using Tapatalk

[FLOORED]

Originally Posted by dead_man00124

Hi its for an AU s1 ghia so traction control& irs

Sent from my LG-H340 using Tapatalk

Did you change the front end to a series 2 for the Brembo conversion ? i do not have the specs for the AU S1 rear hoses so you may need to work with me on this one and they are a little dearer.

[dead_man00124]

Its s2-3 front suspension

My mate has a s2 so i can check the lines and see if they are different

Sent from my LG-H340 using Tapatalk

[FLOORED]

Originally Posted by dead_man00124

Its s2-3 front suspension

My mate has a s2 so i can check the lines and see if they are different

Sent from my LG-H340 using Tapatalk

The rear hoses on sedan and wagons and utes depending on ABS or IRS and even traction control make life making rear Ford hoses a living nightmare for me as alot of Fords were also recalled because of the hose issues they had.
I can make every Ford rear hose once we get the correct set up.

[AussieSlacker]

How much for just 328mm PBR red calipers?

[FLOORED]

Originally Posted by AussieSlacker

How much for just 328mm PBR red calipers?

I have a couple of red pair left @ $220 a pair thanks

[stevefreestyle]

Originally Posted by FLOORED

I have a couple of red pair left @ $220 a pair thanks

Hi Floored, Will these FG 328mm Rears fit under 17" Rims ? I have a BA XR8 with Premium Brakes (325mm Fronts).

Thanks

[stevefreestyle]

Originally Posted by stevefreestyle

Hi Floored, Will these FG 328mm Rears fit under 17" Rims ? I have a BA XR8 with Premium Brakes (325mm Fronts).

Thanks

Sorry, correction - I meant BF XR8 328mm Rear Rotors/Calipers.

[FLOORED]

Originally Posted by stevefreestyle

Sorry, correction - I meant BF XR8 328mm Rear Rotors/Calipers.

All the 328mm rear kits are basically the same on the rear of the BF or FG just the hoses that are different and yes they fit the majority of 17" wheels.

[5LXHR8]

Any of these campers left?


Sent from my iPhone using Tapatalk

[FLOORED]

Originally Posted by 5LXHR8

Any of these campers left?


Sent from my iPhone using Tapatalk

Yes i have a set available.

[5LXHR8]

Originally Posted by FLOORED

Yes i have a set available.

And if I've got this correct I'll need a set of 328mm rotors to use or can I use these with my standard brakes on my series 1 BF? And will they fit the braided brake lines I just ordered through you via phone an hr ago?




Sent from my iPhone using Tapatalk

[MR_FG_09]

Hi im after the full kit of T3 rotors, PBR calipers, pads & braided lines any kits available

Sent from my SM-A520F using Tapatalk

[FLOORED]

Originally Posted by MR_FG_09

Hi im after the full kit of T3 rotors, PBR calipers, pads & braided lines any kits available

Sent from my SM-A520F using Tapatalk

So the complete rear 328mm kit only and is it for a BA BF FG sedan or ute with or without traction control thankyou.

[MR_FG_09]

Originally Posted by FLOORED

So the complete rear 328mm kit only and is it for a BA BF FG sedan or ute with or without traction control thankyou.

Sorry mate FG sedan with traction control

Sent from my SM-A520F using Tapatalk

[FLOORED]

Originally Posted by MR_FG_09

Sorry mate FG sedan with traction control

Sent from my SM-A520F using Tapatalk

Can do a complete rear kit for $825
Will have
Red 328mm pbr rear calipers x 2
DBA T3 rear rotors x 2
Wagner rear brake pads
Braided rear brake lines.

[MR_FG_09]

Originally Posted by FLOORED

Can do a complete rear kit for $825
Will have
Red 328mm pbr rear calipers x 2
DBA T3 rear rotors x 2
Wagner rear brake pads
Braided rear brake lines.

Cheers mate im also looking at upgrading front 6 pot brembo pads either pmu NS400 or winmax W1 i do the odd happy laps morning at QR would either pad do the job 90% street driven
But plenty of spirited driving
Also want to flush the brakes would 2 bottles of the A.P racing do the job
And are the wagner pads performance orientated or only for street duties
All freighted to 4226 cheers

Sent from my SM-A520F using Tapatalk

[MustangNicko]

Hey mate Im looking at doing the upgrade in my fg 2 turbo ute. Are you still doing kits? Do I need new lines or do the oem lines fit the upgrade?

[FLOORED]

Originally Posted by MustangNicko

Hey mate Im looking at doing the upgrade in my fg 2 turbo ute. Are you still doing kits? Do I need new lines or do the oem lines fit the upgrade?

Yes and message sent thanks

[orsm8]

Hi Racebrakes, I am after a ser of calipers to suit the 328 territory rotary. Do yo have them in stock and in red.pleaseCheers Tony

[FLOORED]

Originally Posted by orsm8

Hi Racebrakes, I am after a ser of calipers to suit the 328 territory rotary. Do yo have them in stock and in red.pleaseCheers Tony

Only unpainted calipers available these days sorry and they are $180 each to you