|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
28-08-2013, 05:24 PM | #1 | ||
Starter Motor
Join Date: Aug 2013
Posts: 2
|
hi guys i have a 2008 Fiesta (Newershape) and My radio display turns off, then turns back on in a few seconds, then about 20 seconds later the actual radio itself turns off.
Has anyone had this problem before or no how to fix it? Many Thanks josh |
||
29-08-2013, 06:26 PM | #2 | ||
Starter Motor
Join Date: Aug 2013
Posts: 2
|
Anyone have any idea?
|
||
14-03-2014, 03:03 AM | #3 | ||
Starter Motor
Join Date: Mar 2014
Posts: 13
|
Hi,
The radio in my 2008 Fiesta has just done the exact same thing. How did you deal with it? Cheers. |
||
14-03-2014, 08:01 PM | #4 | ||
Regular Member
Join Date: Jul 2012
Posts: 497
|
It sounds like "dry solder". This is where a solder detaches itself from its connection. If it appears as the same fault over many units it comes down to the skill of the person/robot doing the soldering.
As most circuit board have hundreds of solder joints it is extremely hard to track. |
||
21-03-2014, 06:27 PM | #5 | ||
Starter Motor
Join Date: Mar 2014
Posts: 13
|
Hi,
Looks like I'll have to purchase a second-hand radio and install it... Cheers. |
||