|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
25-04-2022, 05:52 PM
|
#1 | ||
|
Starter Motor
Join Date: Jul 2017
Posts: 15
|
Hello I have a Focus going into limp mode "Transmission limited function" the error is related to solenoid D this was happening approx 10 K ago the fluid was replaced and has been ok until now , I am considering removing the valve body and cleaning I have seen a Mondeo on you tube but it looks pretty tight under the bonnet of the focus , has anyone done this repair?
|
||
|
|
|
02-05-2022, 08:46 AM
|
#2 | ||
|
Starter Motor
Join Date: Jul 2017
Posts: 15
|
The answer is to remove the valve body/mechatronics you will need to remove the radiator fan to remove that you will need to remove the bumper and the top radiator support assembly it quite a job , there is a video on youtube that shows removing the fan from the bottom but on my model LW 2011 diesel titanium this was not possible as there was no possibility of pushing it up without removing the radiator support
|
||
|
|
|
LW Diesel P0766 Trans solenoid D
Hybrid Mode