|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-08-2010, 08:50 PM
|
#1 | ||
|
dang-r-us
Join Date: Jun 2007
Location: Brisbane, QLD
Posts: 20
|
hi everyone
my daily driver 87 laser carby just **** itself (no compression). im wondering if any of you have tinkered around with a 1.8 efi, trying to fit it to a carby model?? i know i'll have to get an ecu. but mechanical things like are the engine mounts the same? does the gearbox have the same stud patter? clutch? and so on... any info would be really appreciated thanks ben |
||
|
|
|
10-08-2010, 07:05 PM
|
#2 | ||
|
Regular Member
Join Date: Apr 2009
Posts: 181
|
As long as the engine size is the same, it should bolt right in. With the box, not sure if the bellhousing is the same or not. But when you take it out, it will be as one assembly with box and motor together anyway. Just take the bell housing of the box and put it on the new motor to see first. Plus, fuel pump will need to be electric and not mechanical too.
|
||
|
|
|
|
02-09-2010, 05:27 PM
|
#3 | ||
|
The Red Rocket
Join Date: May 2009
Posts: 20
|
they do make a 1.6i sohc for these ghia's have them. if your gonna do a 1.8 drop a BP in it 1.8 DOHC same as kf/kh tx3
|
||
|
|
|
87 laser efi conversion
Hybrid Mode