Ba 4speed workute goes 10.63 @132mph, Now 10.44@129

xr6t_ute · 09-06-2012, 08:35 PM

Have acheived a new PB at Heathcote AFF Drags day....

Built motor
Built 4 speed auto 2800 stall
Nizpro stage 2 kit
Standard factory turbo with 18psi actuator and flapper mod.
E85

This is my only vehicle for the last 5 yrs , its my daily workute, driven to the track and changed to slicks, and driven back home.

Many thanks to Tony from Ultra Tune Dandy for all his mechanical work.
Heath for his custom wheels
Riphsv for the sticky tyres
and Daniel Nagy (Headsex) for his great tuning abilities.

One day il retire it for a big turbo upgrade :-)

dalts · 09-06-2012, 08:55 PM

Great stuff Ivan you have to be happy with that on the standard turbo!

xr6t_ute · 09-06-2012, 09:25 PM

I'll be even more happier with a 10.5x...haha

SpoolMan · 20-06-2012, 10:34 AM

Quote:

Originally Posted by xr6t_ute

I'll be even more happier with a 10.5x...haha

Ivan remove the hardcover and it may get you there, 50kg easy in the hard cover..

Quote:

Originally Posted by rednose

Credit where credit is due.

Agree drive the car to the track and run a 10 and drive home again its great going.

**Bluepower** · 20-06-2012, 10:51 AM

great time bud, car sounded strong all day.

Chris

xr6t_ute · 20-06-2012, 11:50 AM

Quote:

Originally Posted by Bluepower

great time bud, car sounded strong all day.

Chris

The sound of yours makes me want to jump back in a 8, tuff as :-)

xr6t_ute · 20-06-2012, 11:48 AM

[QUOTE=SpoolMan]Ivan remove the hardcover and it may get you there, 50kg easy in the hard cover..

My hardcover is actually very light, I've had it off a few times, I would say about 10kg, the tailgate I havnt tried, and i believe that may carry quite a bit of weight.
Will take the weight off once my personal goal is reached (10.5x).

SpoolMan · 20-06-2012, 01:08 PM

[QUOTE=xr6t_ute]

Quote:

Originally Posted by SpoolMan

Ivan remove the hardcover and it may get you there, 50kg easy in the hard cover..

My hardcover is actually very light, I've had it off a few times, I would say about 10kg, the tailgate I havnt tried, and i believe that may carry quite a bit of weight.
Will take the weight off once my personal goal is reached (10.5x).

Tailgate isn't much, took this one off once guessing 12kg.

allmtr · 22-06-2012, 11:04 PM

[QUOTE=xr6t_ute]

Quote:

Originally Posted by SpoolMan

Ivan remove the hardcover and it may get you there, 50kg easy in the hard cover..

My hardcover is actually very light, I've had it off a few times, I would say about 10kg, the tailgate I havnt tried, and i believe that may carry quite a bit of weight.
Will take the weight off once my personal goal is reached (10.5x).

Towbar 25kg
Toolkit 4.6kg
Spare wheel 23.5kg
Tarp and supports 3kg
Spare tyre mount 2.8kg
Tailgate liner 2.5kg
Tailgate 15kg
Tray liner 18.2kg
Tub 132kg
Tub braces 4.4kg

allmtr · 09-06-2012, 10:23 PM

Nice MPH too

Well done!!!!!!

prasac · 10-06-2012, 09:14 AM

great job mate. gotta be happy about that.

40RDT · 11-06-2012, 12:42 AM

Nice one, how it the 4spd holding up? Is it running stock diff?

xr6t_ute · 11-06-2012, 12:55 AM

Yeh the btr 4 speed is 4.5 years old, i broke the planateries about 3 weeks ago, and Phil at Bayswater said the bands and clutches are still like new, so put it all back together with a cyro'd Au planatery set.

Diff is standard, ive had the lsd rebuilt twice in the 5 yrs ive owned the ute.

I had the trans slipping on me on my second run, still trying to think why as it only did it once out of all the runs.
Had the reservoir water tank lose water, so im trying to find out if this was the cause of it.

Running full slicks does put alot more load on the trans also.
So i have some things to look at before my next outing.

40RDT · 11-06-2012, 11:18 AM

Quote:

Originally Posted by xr6t_ute

Yeh the btr 4 speed is 4.5 years old, i broke the planateries about 3 weeks ago, and Phil at Bayswater said the bands and clutches are still like new, so put it all back together with a cyro'd Au planatery set.

Diff is standard, ive had the lsd rebuilt twice in the 5 yrs ive owned the ute.

I had the trans slipping on me on my second run, still trying to think why as it only did it once out of all the runs.
Had the reservoir water tank lose water, so im trying to find out if this was the cause of it.

Running full slicks does put alot more load on the trans also.
So i have some things to look at before my next outing.

How much power can the btr's handle? I am looking into buying a ba xr8 ute to put a kenne bell on it but not sure whether to get the 4spd auto or 6 speed manual.

CYC06T · 11-06-2012, 04:00 AM

Awesome work mate. Well done on the time. Looks like you can go quicker yet!

CYC06T · 11-06-2012, 04:00 AM

Awesome work mate. Well done on the time. Looks like you can go quicker yet!

xr6t_ute · 11-06-2012, 12:12 PM

There only 3 Btr's that i know of that have lasted a few yrs,mine is one of them, others i know havn't lasted much at all.... So it all depends on how you drive it and how well you look after it, and who builds it.

My tuners pushing 480rwkw but clicked it into 4th not long ago crossing the line for a 10.3 and fryed the 4th band.

So dont ever touch 4th at full throttle, that's one of the mistakes people make, the other is cruising around in the wrong gear with a convertor, just creates unecessary heat and wears the clutches.

I basically drive mine like a manual and never gets put into normal mode, and i make sure im off the convertor stall speed before i change to the next gear.
I believe thats pretty much why my clutches are still like new, cause my changes are hard and not soft and slipping into gear.

Giant · 11-06-2012, 04:35 PM

Congrats good job.

Black F6 · 11-06-2012, 04:42 PM

Well done mate, awesome time and even better that it's your daily

XT302 · 11-06-2012, 04:59 PM

Great stuff, you must be stoked

xr6t_ute · 12-06-2012, 05:54 PM

Yeh pretty happy with it, i'll try and see if i can better my 60ft so i can get in the 10.5s... then i'l be happy, full weight ute with std factory turbo in the 10.5's is music to my ears.

mickyyyy · 12-06-2012, 08:49 PM

Only if someone actually looked at designing a complete new valvebody for the BTR to be manual, then they would be a good box as you can control it all and over drive...

barra T · 12-06-2012, 09:14 PM

Quote:

Originally Posted by mickyyyy

Only if someone actually looked at designing a complete new valvebody for the BTR to be manual, then they would be a good box as you can control it all and over drive...

I know of a place that does

mickyyyy · 13-06-2012, 11:27 AM

Quote:

Originally Posted by barra T

I know of a place that does

Hope your not pulling a leg bud

So is it full manual hydrolic valve body with no electronics used to shift gears and engage overdrive???

or still has electronics but shifts when you hit the shifter???

Please let us know who is doing this...

barra T · 13-06-2012, 11:33 AM

pm sent

Cant send them as your inbox is full or something,maybe I did something wrong?

Anyway,82621688 and speak to Sam Fidele.He does what you are asking for.

mickyyyy · 13-06-2012, 11:43 AM

Just deleted some msges bud

Send me what you know before i make the call to Sam

xr6t_ute · 13-06-2012, 02:36 PM

Yarra Valley Transmissions (Melbourne) have a 4 speed auto no electronics and you can full throttle in 4th gear. Its a reverse transbraked 4 speed built to handle 1000hp, It is not a Btr and price is around 8k.

mickyyyy · 13-06-2012, 03:15 PM

Quote:

Originally Posted by xr6t_ute

Yarra Valley Transmissions (Melbourne) have a 4 speed auto no electronics and you can full throttle in 4th gear. Its a reverse transbraked 4 speed built to handle 1000hp, It is not a Btr and price is around 8k.

More than likly its a Jatco or 4L80E/4L60E...

xr6t_ute · 13-06-2012, 03:41 PM

Neither of them...its not a holden box.
http://www.youtube.com/watch?v=BLwdXvhX5f0

mickyyyy · 13-06-2012, 05:42 PM

That seems like there own model number...

Wonder what core they are using??? also seems it may take abit more hp out of it from the size of the bits...