|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-04-2017, 11:39 AM
|
#1 | ||
|
Regular Member
Join Date: Jun 2009
Posts: 245
|
I am fitting AU Fairlane electric seats into an AU1 XR8..there is a 2 pin plug under the drivers side carpet would anyone know if that is where the seat loom plugs into.?..any help appreciated.
|
||
|
|
|
05-04-2017, 03:06 PM
|
#2 | ||
|
Parts bin special
Join Date: Mar 2005
Location: Narre Warren, Vic
Posts: 8,276
|
Yep, that's for the basic electric seats. I'm guessing the Fairlane drivers seat would be a memory seat so would have the bigger plug. When I put Ghia seats in my old AU, I made an adaptor to connect the 2 pin plug to the big seat plug (I found the right plugs on an old E-series dash loom of all things!). I just worked out which pin on the seat plug provided basic power and the earth and ignored all the memory stuff
__________________
Weekender 1964 US Falcon Futura convertible - Rangoon Red 260 Windsor V8, 4 speed manual, LHD, Electronic ignition, Mustang wheels https://fordforums.com.au/showthread.php?t=11470868 Daily 2014 SZII Territory diesel - basic runabout Previous Cars 1990 EAII Fairmont Ghia - Tickford engine, 5 speed, SVO wheels, bodykit, much more 2000 AUII Fairmont - XR wheels, Ghia interior 2010 FG XR50T ute - XR8 bonnet, Streetfighter intake |
||
|
|
|
|
07-04-2017, 10:15 PM
|
#3 | ||
|
Regular Member
Join Date: Jun 2009
Posts: 245
|
As it turns out the plug on the on the seat was after market bought a set of connectors and voila..fully functioning..more comfortable..looks better..it has 4 way function very pleased..only problem now the rear squabs doesn't fit into a series 1..the mounting points cant be adjusted to engage the latch mechanism..has anyone done this conversion successfully?
thanks for your reply Dezza. |
||
|
|
|
Fairlane elect seat..AU1 XR8
Hybrid Mode