Another GT out the door

[Theo@BluePower]

This car has come in for the Bluepower 5.0L Upgrade package. KPM Intercooler, Yella Terra Snout Upgrade with 61mm pulley, Di Filippo Header Back Big Boy system, 900cc Injectors & X4 Flash tuner.

Car was already tuned from another shop (HP tuners ) making 349Kw on our dyno and now after the mods it consistently making 445-455Kw.

Stock engine, Stock ZF Tune & Stock Fuel Pump.

[FPV_Steve]

Another awesome result from the boys at Bluepower!

Keep up the good work guys!

[Trump]

Holy f..balls!!! That is seriously impressive!

[gtp22]

Nice work guys

[BLOHSV]

Awesome stuff guys I think it's time to bring mine in for more upgrades

[malazn mafia]

What 0-100 times can a 445kw tuned GT with good rubber achieve? The 0-100 times advised on KPM's Streetfighter package are rather disappointing for the power output at 4.3 seconds.

[JC]

Originally Posted by malazn mafia

What 0-100 times can a 445kw tuned GT with good rubber achieve? The 0-100 times advised on KPM's Streetfighter package are rather disappointing for the power output at 4.3 seconds.

4.3 disappointing? The first 2 seconds would be spent getting grip, I reckon.

[malazn mafia]

Originally Posted by JC

4.3 disappointing? The first 2 seconds would be spent getting grip, I reckon.

Can grip be achieved? Wouldn't mind being able to actually mow down some fast contemporary RWD cars (M5, Porsche, Ferrari all in vicinity of 0-100 in 3.5 sec) in the humble GT if I were spending that sort of coin.

[Theo@BluePower]

Hey guys well we have a good result with another new GT.

This car still only has 4,000k on the clock and rolls on 22' wheels
Not a bad result and will be interesting when some more K's are put on this car.

Check this out..

FPV GT 2014 Manual with our package

Di Filippo Header back Duel 3' system
KPM Intercooler
Yella Terra Snout upgrade
1000cc injectors
K&N Air Filter

[Ruby66]

Hi Theo,
I have a 2013 GT with a tune + filter (376 RWKW)
How much would I have to budget for a package like the one bellow,

what sort of performance would I expect with 470 odd RWKW assuming I could get traction?

thank you

Theo

Originally Posted by Theo@BluePower

Hey guys well we have a good result with another new GT.

This car still only has 4,000k on the clock and rolls on 22' wheels
Not a bad result and will be interesting when some more K's are put on this car.

Check this out..

FPV GT 2014 Manual with our package

Di Filippo Header back Duel 3' system
KPM Intercooler
Yella Terra Snout upgrade
1000cc injectors
K&N Air Filter

[Shonky.]

Has this car got a voltage booster for the factory fuel pump?

[Theo@BluePower]

We only see a few cars that need them added, since these cars are still new its not needed but once they get older we will see the need for them.

This car did not need it

[icecold84]

Wow damian would be happy with that result..

[Buttnekid]

Theo

do you have any data comparing power outputs of Di Filipo v Manta.

When you say header back, do you means cats and cat back, or including headers?

How much is the Di Filipo headers, cats and cat back system worth (happy for PM)?

What does it sound like compared to the Manta set up?

[Theo@BluePower]

The headers will always make a difference on any engine. The efforts to put headers on doesn't out weigh the KW in return of dollars spent on a 5.0. If you are putting a forged motor in then its a different story.

The Di Filippo system we use in our package uses a Header delete pipe that bolts on to the Factory Header and moves the cats back near the start of the Cats back. We have found this to work very well for us.

Manta have never really kicked off in Melbourne, the only cars we see with them are the ones that are transported over from W.A

Di Filippo Header back system is Quad $3300 Fitted + Tips and Ute $2700 Fitted + Tips

[Theo@BluePower]

It would be under $11K fitted

[Ruby66]

Thank for your prompt reply Theo,
It's good to know how much I need to budget for,

I haven't heard much about this Di fillip system,
-how to they compare to the X force system?
-being a 3 inch system to they drone much?
-would keeping the factory system and just changing cats give similar results?

thanks

Theo

Originally Posted by Theo@BluePower

It would be under $11K fitted

[Buttnekid]

thanks Theo, so the factory header remains in situ, you then have the factory cat delete pipe and then after market cats moved further under the car then run into a catback.

Clearly some R&D has gone into that to arrive at that solution which sounds pretty smart - any chance of a sound clip.

I am putting a forged motor in and a big boy KB but I am tossing up extractors and exhaust - I still havent heard a Di Filippo system yet

[Theo@BluePower]

Ruby66 - Your best to give me a call and I can go into much more detail with you.