|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
07-11-2007, 03:19 PM | #1 | ||
elmo
Join Date: Oct 2007
Posts: 17
|
does anyone know if it possible to turn a 1990 ford telstar txf fwd into an awd? if it is possible i will be doing the conversion and will start some serious work on my car to make it ready for a 9sec drag. im budgeting $50,000 for everything
|
||
07-11-2007, 03:36 PM | #2 | ||
The 'Stihl' Man
Join Date: Jan 2005
Location: TAS
Posts: 27,585
|
Surely there is a better car you can start with. Also 9's in an AWD would cost more than $50k I would have thought.
If you have that much cash, buy a R32 GTR is AWD is a must.
__________________
|
||
10-11-2007, 01:03 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Canberra
Posts: 13,436
|
http://translate.google.com/translat...%3Den%26sa%3DG
Definitely was an AWD version in Japan. Finding the parts would be a pain though ;) |
||
10-11-2007, 03:53 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Oct 2006
Posts: 1,819
|
buy a torana build a 355 stroker on nos and you have 9's
|
||
12-11-2007, 11:53 AM | #5 | ||
elmo
Join Date: Oct 2007
Posts: 17
|
R32 GTR hummmmm BORING!!! it been done a million times!! and toranas are nice but you gotta admit there are quite a few around. im going to stick with the telstar as i like to be very different. at the moment plans are underway to put a 2l f20c from a honda s2000 into the car and the front is being mini tubbed. some ppl may think this project is a little impossible but im an auto electrician by trade and dad is a panel beater and mechanic with experience at bathurst back in the good old days. im going to see if i could track down the awd drive parts to look at the potential.
|
||