![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | ||
Regular Member
Join Date: Jun 2012
Location: Grovedale Victoria
Posts: 53
|
I'm having trouble putting my scissor jack back correctly after changing a wheel. I would like someone to send a picture or diagram of the right setup please. The car is an MD Mondeo Titanium hatch.
Many thanks in advance. |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
__________________
Undecided replacement... [SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD] |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Regular Member
Join Date: Jun 2012
Location: Grovedale Victoria
Posts: 53
|
Thanks Cobrin for your fast reply. Unfortunately the information shown in the manual is different to what my car has. My car does not have any moulded foam for the jack and handle to sit in. There is a single stud that screws into a fixed floor bracket. The tow hook is attached to the jack itself with nylon C clips. The spare wheel goes over this face up and is secured with a plastic nut. My dilemma is getting the jack back into its original position. If anyone has a similar model I would love to get a photo of the jack in situ.
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
Bugger was worth a try, sorry mate.
__________________
Undecided replacement... [SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD] |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Starter Motor
Join Date: Sep 2011
Posts: 2
|
Hi there....The actual jack handle folds up and actually fits onto the jack itself via a round hole at the top of the jack and a lug on the bottom...so the "extension" of the jack itself is determined by the dimension of the jack handle. Once you fit the handle onto the face of the jack you then just wind it out to tension it up for stowage.
image2.JPG image3.JPG |
||
![]() |
![]() ![]() |
3 users like this post: |
![]() |
#6 | ||
Regular Member
Join Date: Jun 2012
Location: Grovedale Victoria
Posts: 53
|
Thank you very much for the photos. I should have taken a photo myself before removing it.
|
||
![]() |
![]() ![]() |