|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
17-08-2015, 09:11 PM
|
#1 | ||
|
falconforever
Join Date: Dec 2013
Posts: 12
|
I just bought a KN Laser but I would like to know if a rwd conversion can be done and I'm not talking about putting the engine in the back more n/s engine conversion to rwd or maybe an awd conversion I would like it if I can squeeze a 2 litre from an SR2 or SP20 or maybe a small v6 maybe from a late model Telstar or Mazda
|
||
|
|
|
18-08-2015, 03:59 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
no rear wheel drive line combination comes to my mind to suit a KN Laser chassis...not for road legal anyway
all wheel drive yes first you need a a donor car A - Tx3 4x4 laser 1.8Turbo has all the drive train and brakes ect for a conversion the TX3 uses a DOHC 16 valve motor TX3 not trashed are hard to come by your budget might start at $5000 then the motor change will depend on if you want it road register able in your state
__________________
My car goes Brumm Brumm Last edited by dirty hands; 18-08-2015 at 04:07 PM. |
||
|
|
|
KN Laser rwd or awd conversion
Hybrid Mode