|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
30-01-2014, 11:09 AM | #1 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Central Q..10kms west of Rocky...
Posts: 8,307
|
My WQ, remote refuses to unlock the door. But does the boot. New battery didn't help. New remote $238 plus programing !!! Thats just the remote part not including key..Going online to see if I can get it cheaper..or its just manual unlock!!!!
__________________
CSGhia |
||
03-02-2014, 10:17 AM | #3 | ||
FF.Com.Au Hardcore
Join Date: May 2008
Location: Darwin
Posts: 1,694
|
I had to just get another key cut and programmed without the remote...still $160 odd.
__________________
1976 XB Falcon 500 Wagon - BUILD THREAD Sherwood Green | 3spd/250CI | Running Whitewalls on a 2.5" Drop |
||
26-12-2014, 01:34 PM | #4 | ||
Starter Motor
Join Date: Sep 2014
Posts: 7
|
My second hand Fiesta came with only one key/remote. I was able to buy an after market blank key/remote from eBay for about $25. It came from Hong Kong. I was able to program the remote without any probs. A local locksmith cut the key for me for $33 but couldn't program the immobiliser chip. Very few locksmiths have the equipment to do this and usually will only be able to program their own blank keys/chips without a remote.
John Barnes in Melbourne will make you a spare key for $165. The chip will be imbedded in the plastic head of the key. If you want to you can cut the plastic open, take out the small immobiliser chip and put it in your new shell from Hong Kong. Then you will have two key/remotes. If your old key/remote is worn or broken then take the chip out of it and put it in the new one from eBay. I don't know of a cheaper way of doing it but am very much open to suggestions. The programming of an immobiliser chip is expensive because of the cost of the equipment needed to do it and the many makes and types of chips used by the different car manufacturers. When it comes to cost, try 'all keys lost' and see what change you get from $500 after a call out. |
||