|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-02-2009, 11:08 PM
|
#1 | ||
|
Starter Motor
Join Date: Jun 2008
Posts: 2
|
Hi There,
I have a mk1 2dr escort that was bought in bits with the compliance plates loose off the car. Other eskys I've seen have one of the heater dome and one down on the inner guard but mine only came with 1 plate for the heater dome. I seem to remember my old 1970 falcon only having one as well so thought it was fine but now I'm worried I'm missing one. Does anyone know how many there should be for each year model and especially whether the 1970 should have had 2 or 1. Thanks, -Andy |
||
|
|
|
06-02-2009, 02:03 PM
|
#2 | ||
|
Regular Member
Join Date: Dec 2005
Posts: 142
|
Hi. The 1970 escort only had one id plate on the heater plenum.
The twin id plate system came with the 73 models. |
||
|
|
|
|
06-02-2009, 02:15 PM
|
#3 | ||
|
Starter Motor
Join Date: Jun 2008
Posts: 2
|
Thanks Caprispecial, just what I was looking for -Andy
|
||
|
|
|
Compliance Tags on Mk1 Escort 1970
Hybrid Mode