|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
18-05-2015, 09:38 PM | #1 | ||
Regular Member
Join Date: Aug 2006
Location: Adelaide
Posts: 98
|
Hi guys,
Was cleaning the Laser and noticed a small hose hanging which is connected to an adjustable valve? Anyway can someone please advise where it is suppose to be connected as I have hunted for a connection without success. Cheers
__________________
AG3NT - 2008 FG G6E Turbo / Turbo Side Intake / 19 Inch Dark GT335 Wheels / ASL RGB System / FPV Cluster / 60lb Injectors / F6 Piping & Intercooler / KPM Tune JON211 - 2002 BA Fairmont / Full Ghia Upgrade SKYE89 - 2012 SZ Territory Titanium
|
||
19-05-2015, 05:56 PM | #2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
how long you had the laser and what model and engine is it please
its antipollution stuff to me ...now maybe disconnected you need a vacuum layout/diagram .. for the Laser ..I dont have that by the picture ,there looks like there was once a hose on there, to the outlet bit of the black thingy needs the thinnest vac hose the other hose above is thicker ? has that filled in bit of outlet pipe on the plenum meant to be blocked off
__________________
My car goes Brumm Brumm Last edited by dirty hands; 19-05-2015 at 06:04 PM. |
||