Coil overs to suit AU w/ IRS

Ride · 07-04-2013, 07:23 PM

Hi guys,

Been doing a bit of reading around the forums in regards to shocks and have found myself here.

I know the AU is getting on a little bit in age, however there hasn't been a coil-over setup for IRS developed ever since its release by any of the well known brands, and the response always from them is that "there isn't enough demand".

Would there be interest from Shockworks to develop a rear set for AU IRS? Or perhaps a one off cost not too prohibitive? The front is the same setup as BA so no issue there, but the rear is where it's quite badly needed.

Cheers,
Andrew.

Shockworks · 10-04-2013, 09:53 AM

Hi Ride,
We have been thinking about this for a while. If you can supply and old rear damper with the top mount we will start on some drawings and have a sample set made for tuning and development. The top mount in the rear is VERY soft and so would prefer to make a new top mount to give better control for small rod displacements.
Cheers
Brett

Sox · 10-04-2013, 07:35 PM

Quote:

Originally Posted by Shockworks

Hi Ride,
We have been thinking about this for a while. If you can supply and old rear damper with the top mount we will start on some drawings and have a sample set made for tuning and development. The top mount in the rear is VERY soft and so would prefer to make a new top mount to give better control for small rod displacements.
Cheers
Brett

I've had a crack at re-inventing the wheel, so to speak...

Take a gander here -
http://www.fordforums.com.au/showthread.php?t=11353903

And here -
http://www.fordforums.com.au/showthread.php?t=11384818

There's around 10-12 out there with no complaints so far.
I've had mine on for at least 20,000k's now and all is good.

As the first thread shows, we did have a few minor hic-ups, but they've been sorted.

I haven't finalised the adjustable version in the second thread yet, time has been a bit limited lately.

Ride · 14-04-2013, 11:47 AM

Quote:

Originally Posted by Shockworks

Hi Ride,
We have been thinking about this for a while. If you can supply and old rear damper with the top mount we will start on some drawings and have a sample set made for tuning and development. The top mount in the rear is VERY soft and so would prefer to make a new top mount to give better control for small rod displacements.
Cheers
Brett

Don't have any old dampers around, I can source a second hand pair from a wreckers or the like?

Mounts I have (are in very good condition), could send those down too but would like them back.

Any idea on rough price?

Shockworks · 15-04-2013, 03:46 PM

The full AU kit will be $2000 including top mounts, springs and adjustable dampers.
We would like to send the rear top mounts to the team in Korea due to the angle of the mount and will do the damper drawings in Australia. We will return the rear mounts when they finish the design and get it back to you. When you have time email me at brett.obrien@shockworks.com.au to get things started. I will be back in Australia after I finish testing the stock cars and some other teams I am supporting here.
Cheers
Brett

**Polyal** · 10-04-2013, 07:40 PM

Perhaps like other I too would be curious to know a price on a kit.

**TICK4D-TAS** · 28-06-2013, 03:11 PM

Definitely interested in this one, its something on my 'to do' list for the race car.

Andy XR8 · 01-07-2013, 05:14 PM

I'm also one that is very keen to get a set for my AU.

Shockworks · 02-07-2013, 10:48 AM

We will get onto the AU rear as soon as we can. We have to source the rear mount and damper to measure and will send the mount to the team in Korea as the angle needs to be sorted.
We are in the middle of so many different cars that its has been difficult to get to the AU rear at the moment but we will get to it soon.

Cheers
Brett

**TICK4D-TAS** · 02-07-2013, 12:42 PM

Hi Brett,

I have spare rear mounts at home that I can send over if you require? I don't have spare springs and shocks though.

Cheers,
Tim

MADED-6 · 16-07-2013, 07:02 PM

I am also very keen for a set.

My brother got some in his bf xr6t and they are amazing.
I hope the news for au irs coilovers comes in soon :-)

Andy XR8 · 12-11-2013, 07:51 PM

G'Day Guys, was hoping to hear of any updates you may have with the development of the kits for the AU.

Cheers,
Andy

Shockworks · 13-11-2013, 01:48 PM

Hi Andy,

We still don't have the rears made yet. Under the pump at the moment with race teams and the development for some cars which had been planned for a while so really sorry for the delays for the AU. We have the fronts sorted but the rear top mount has been the issue for us but will get something posted as soon as we have this done mate.

Cheers
Brett

MADED-6 · 06-04-2014, 06:23 PM

Any movement on this guy's :-).
Look forward to any news.

Shockworks · 18-04-2014, 04:33 PM

Quote:

Originally Posted by MADED-6

Any movement on this guy's :-).
Look forward to any news.

Hi Maded,

Sorry for the delay with the response mate. We still haven't finished the rear AU IRS dampers as we have so many programs on the go.
I will post something soon and get the AU dampers sorted as soon as we can. We are designing a new top mount for the rear to go with the shock which is taking some time.
Cheers
Brett

MADED-6 · 21-04-2014, 12:11 PM

Thanks brett, I understand you guy's are busy which is great just thought I'd check in for updates :-).

Hope to hear something as soon as you can.

Shockworks · 21-04-2014, 01:29 PM

Quote:

Originally Posted by MADED-6

Thanks brett, I understand you guy's are busy which is great just thought I'd check in for updates :-).

Hope to hear something as soon as you can.

Yeah I'm sorry mate. I have arranged a sample rear so will get things happening in the next couple of months. Currently flat out in Korea testing a few race cars for the new season here. Not all bad though. Free tyres, brakes and track hire but the cars are so friggin loud here and my ears are still ringing from yesterday!!
Cheers

blownv8au · 10-01-2015, 01:30 AM

Any progress on this?

Shockworks · 13-01-2015, 09:19 AM

Quote:

Originally Posted by blownv8au

Any progress on this?

We have made rear dampers for an AU race car but using spherical bearings at the mounting points. We still need to finish dampers for the standard top mount and we will have them available in the next couple of months. Sorry for the delay with this as we have be so very busy.
Cheers

**TICK4D-TAS** · 16-01-2015, 12:03 PM

Quote:

Originally Posted by Shockworks

We have made rear dampers for an AU race car but using spherical bearings at the mounting points. We still need to finish dampers for the standard top mount and we will have them available in the next couple of months. Sorry for the delay with this as we have be so very busy.
Cheers

What category is the race car used in?

I have been watching this thread, as I am interested in a set for my race car, but I have to make sure it stays within the rules for IPRA.

Shockworks · 16-01-2015, 12:08 PM

Quote:

Originally Posted by TICK4D-TAS

What category is the race car used in?

I have been watching this thread, as I am interested in a set for my race car, but I have to make sure it stays within the rules for IPRA.

Hi Tick4d,

It was for a customer of Ted Robinson Racing that is building the car up. Similar to our GT40 damper but had the Ford lower fork mount for the lower arm with bearing at the top mount. This is a new car build so I dont think it has been raced before.
Cheers
Brett

Ride · 15-02-2015, 03:11 PM

Just posting up to say that I'm still very interested and wish to see this completed

**TICK4D-TAS** · 17-02-2015, 01:07 PM

Quote:

Originally Posted by Ride

Just posting up to say that I'm still very interested and wish to see this completed

Same here.

Shockworks · 18-02-2015, 09:39 AM

Quote:

Originally Posted by TICK4D-TAS

Same here.

Hi Guy's,
We will get the Au IRS dampers out as soon as we can. We are sorry for the delays as we are a two man team with development of many different cars and components.
Cheers
Brett

**TICK4D-TAS** · 18-02-2015, 11:16 AM

No stress on my part Brett. It's on my list, but I'm working on installing the new engine at the moment. My guess is I would be looking around June.

Ride · 30-03-2015, 06:52 PM

Brett, in the interim, can you run the fronts (which are available) with standard type Koni shocks and factory TS springs? Need to replace my front Koni Yellows and don't want to pay for another set/rebuild if I'm going to go coilover anyway.

Ride · 18-05-2015, 10:12 PM

Bought a set of front coilovers from Brett a couple weeks ago. Fitted them just before a trip to Tassie to break them in, over 2000k's of twisties. Found the sweet spot for good street/twistie cornering at 4 clicks, otherwise leave them on max soft for Sydney's crap roads.

Looking forward to the rears when they come out.

**TICK4D-TAS** · 23-06-2015, 07:46 PM

Any updates on the rears Brett?

Ride · 07-07-2015, 09:05 PM

Quote:

Originally Posted by TICK4D-TAS

Any updates on the rears Brett?

Echo that, Wakefield day coming up on the 24th July has reminded me.

dc_todd · 12-07-2015, 08:47 PM

Adding in too, Any updates? Going to be looking in the next few months very seriously, A good mate just got a set fitted to his BF GT, Transformed the car.