RHS indicators not working

GTP-814 · 09-11-2015, 05:20 PM

HI all
The RHS indicators on my TX5 are not working. The LHS flashes as normal

The relay has a rapid clicking sound

I checked and have replaced all 3 bulbs (side, rear & front) which didn't resolve the issue. The fuse is OK , otherwise the LHS wouldn't work

Any suggestion on my next steps

thanks
in advance

foxtrot3 · 09-11-2015, 05:49 PM

Hi. Try operating the hazard switch a few times to clean the switch contacts. Cheers MD

GTP-814 · 09-11-2015, 08:08 PM

Hi Foxtrot3

I tried that and the LHS indicators work but not the right.
I'm wondering if it could be a switch ion the indicator stalk?

foxtrot3 · 09-11-2015, 08:26 PM

Hi. Doubt its the stalk as it does something when you use it. only other thing I can think of is a short somewhere. Does it have a trailer plug or has any work been done on it lately (new stereo or speakers, the refitting of trims with screws instead of clips or any accident damage. Cheers MD

**Beastie** · 09-11-2015, 09:01 PM

I'm thinking it's the flasher relay (if it has one).

foxtrot3 · 09-11-2015, 09:43 PM

Quote:

Originally Posted by The Beast

I'm thinking it's the flasher relay (if it has one).

Hi. Quite a possibility as they, like mazdas, had a funny 2 way flasher that did left and right using different signals in to it to get different feed to the lights but in 20 years I never sold one or saw a faulty one. I was saving this for last response before saying take it to a sparky. Cheers MD