Hole in airbox?

[josh_hartman]

i was reading up on another topic and people where saying about putting a hole in the front of your airbox and get a tune. well if i put a hole and not get a tune will i get any extra power?

[GTWHOA]

Yeah you should get a small increase in power and throttle response. Just make it down low & out of sight.

[V8falcons]

I did this recently,about a 70mm hole in the front of the airbox and fitted a flex line to a gap in the bumper and id does certainly make a difference,torque wise any way.The amount of air it sucks at idle is surprising ,i have the xr8 intake tube with a ram plate from the grill as well.

[XR6Stu]

Originally Posted by vctxr6ute

I did this recently,about a 70mm hole in the front of the airbox and fitted a flex line to a gap in the bumper and id does certainly make a difference,torque wise any way.The amount of air it sucks at idle is surprising ,i have the xr8 intake tube with a ram plate from the grill as well.

Do you have a pic of your handywork to share?

[V8falcons]

NO I havent taken any pics yet,but its this easy ,find some duct,set your holesaw to that size and drill a hole in the from of the box,fit the duct in the hole and channel it where ever you think water wont suck up into your box.

I dont think it helped my fuel economy figures though so,expect an small increase in fuel consumption.The price we pay :

[2tufracing]

yer the guy from blue power told me to do that to my eb v8 before he tuned it too sounded like crap to me but his the man i hear

[AU2PWR]

Originally Posted by 2tufracing

yer the guy from blue power told me to do that to my eb v8 before he tuned it too sounded like crap to me but his the man i hear

Meh , If Chris Said its so , listen , the guy wouldnt Bull**** you , But dont just Hack at it with a Jigsaw .. Ask Chris what he thinks

[kiraly_75]

Originally Posted by AU2PWR

Meh , If Chris Said its so , listen , the guy wouldnt Bull**** you , But dont just Hack at it with a Jigsaw .. Ask Chris what he thinks

i did mine ages ago with a hack saw.... hahah works a charm and it sounds sick when its suckin in the air when you give it some hahha

[S3SR]

well the XR6T and typhoon have that extra intake bit for a reason i take it....but any old hole anywhere prob wont be the same

[FGII-XR6]

here is what i did to mine http://www.fordforums.com.au/attachm...chmentid=29714 it was just a PVC fitting from bunnings and I plastic welded it in then used vinyl spray to make it black everyone on here will say don't plastic weld it as it will crack within 2 weeks well that was done about 6 weeks ago no cracks and works well it's a fiddly job but worth it

[JC]

This mod has the potential for 50 to 100rwkw increase and is totally worth it. OK, in conjunction with a turbo or supercharger, otherwise at best it's worth 1rwkw, but does help improve induction noise and throttle response. Do not do this mod if you have LPG with a balance pipe though, unless the balance pipe is mounted in the airflow.

[Sleeperau]

Originally Posted by JC

This mod has the potential for 50 to 100rwkw increase and is totally worth it. OK, in conjunction with a turbo or supercharger, otherwise at best it's worth 1rwkw, but does help improve induction noise and throttle response. Do not do this mod if you have LPG with a balance pipe though, unless the balance pipe is mounted in the airflow.

1kw how true here we go again.................

[b2tf]

Ive done it to the ute and combined with the big SS snorkel Ive got it makes one hell of a nice sound, really deep and when you boot it it roars, makes the Wheezer sound great.

Performance wise, bugger all.

[JoesAu]

im ptreety sure ive posted pics of what ive done, if it wasnt this forum it might have been fordmods, do a search for pics

[JoesAu]

check this out!

[blackers10]

i just got the jigsaw and cut a big rectangle out of the front of mine

if you angle it down or drill a hole 1st its easy as

[JoesAu]

The way i done it is best, leaving the hole open in the engine bay is pointless which ive seen done b4, u gotta pipe it to the front of the car where the air is which obviously channels the air to the box. Easy as took about 20mins with 3inch Holesaw and drill. Got that white piece from bunnings in the Gutter section. Pipe from Autobarn all up Cost 30$.

[sly]

G&D reckon there is a high-pressure zone behind the headlight. If you duct around the headlight to behind the grille, you are bypassing any ramcharge effect from this high pressure zone.

[Jokular]

Hi guys ,
sorry for the dumb question but.....
I have a xr6au II and it has the round plastic headlight protectors if i was to do the cut box mod would these make the mod useless?

[Polyal]

Done it to mine, that and another little tweak (no ecu change or anything) netted 6rwkws, dyno'd both times within 10 mins.

Just do it. For the sound alone.

[JoesAu]

all im saying is i culd feel the car go a little better, the induction noise is loud and the car revs better, throttle response is much crispier.

[schuldiner]

yeah i haven't heard an au with the hole in the air box but my mate hasn't tuned his gas on his 96 xg in ages(read never) and twice he blew a hole about that size in his airbox, almost growls like an 8 when he puts the boot in!

[CMYAU3]

yeah great idea. my m8 has done it to his vp and eb but he cut holes in the bottom and went to Purple pig and got some pipe leading to behind the front bumber. he reakens you can hear it suck n more air