|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
18-07-2007, 06:05 PM | #1 | ||
Regular Member
Join Date: Nov 2006
Posts: 179
|
What would I be looking at?
Being poor, Im not going to be paying $1300 to get a reco one put in. Ill get someone to fit a used one, and it will last as long as it lasts. I think you have to replace both wheel bearings as well dont you? thanks... |
||
19-07-2007, 08:03 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Apr 2006
Posts: 784
|
depends on where you live mate.have a hunt around ,you should be able to get a reco one fitted for under a grand.expect another 300 or so for for some gears if you want to change the ratio while your at it.
don't worry about the wheel bearings they'l be fine
__________________
au2 s i6 5 spd , au series 1 xr6 hp motor, cam advanced 5*,jmm cai ,topgun leads,pacey 4480's,3 inch cat,lukey 2 1/2 sports zorst and 3.89 lsd,standard ecu. current best,14.939 @ 93.17. |
||
21-07-2007, 12:04 PM | #3 | |||
Regular Member
Join Date: Nov 2006
Posts: 179
|
Quote:
this is interesting. The mechanic told me that first up to replacve the wheel bearings to see if that is the cause. If that dosent fix it, it would be the diff, as the diffs crapping out is common on AU's. But having replaced the bearings wont be a waste IF it IS the diff, as you would have to replace them anyway when putting in a new diff centre. hmmmm. Dunno. All I know is ,. is the car currently sounds like a prop aeroplane! |
|||
21-07-2007, 12:29 PM | #4 | |||
Cranky old bastard
Join Date: Dec 2004
Posts: 9,394
|
Quote:
|
|||
21-07-2007, 06:22 PM | #5 | |||
Regular Member
Join Date: Nov 2006
Posts: 179
|
Quote:
The mechanic did diagnose the diff as the problem by being in the car as I drove it. He didnt get up on a hoist and look at it or anything. I \ think I need to find out for sure first, though he did seem pretty sure that he couldnt think of what else it would be... |
|||
21-07-2007, 06:36 PM | #6 | |||
mezzo forte
Join Date: Dec 2006
Location: Geelong
Posts: 306
|
Quote:
|
|||
21-07-2007, 07:34 PM | #7 | |||
Cranky old bastard
Join Date: Dec 2004
Posts: 9,394
|
Quote:
|
|||
22-07-2007, 10:00 AM | #8 | ||
www.TUFFCARPARTS.com
Join Date: Feb 2006
Posts: 5,221
|
Sounds like wheel bearings for sure, they can be very annoying!
__________________
http://i1233.photobucket.com/albums/...psc203b7b1.jpg |
||
22-07-2007, 11:09 AM | #9 | ||
FF.Com.Au Hardcore
Join Date: May 2006
Location: Perth, South
Posts: 3,064
|
i have a similar noise at around 90km/h, it vibrates when accelerating and when decelerating, from anything over 90 sounds like an aeroplane and vibrates like anything, it seems like it could be uni joints on mine....putting in neutral lessens the noise and vibration a bit, but it's still there....
|
||
22-07-2007, 11:36 AM | #10 | |||
Regular Member
Join Date: Nov 2006
Posts: 179
|
Quote:
Thats exactly what I have going on, exactly. Not a heap of vibrating, but still there is a bit. Certainly sounds like a prop plane. Uni joint hey? Do you know if they are likely to seize up in a hurry? |
|||
22-07-2007, 11:41 AM | #11 | ||
FF.Com.Au Hardcore
Join Date: May 2006
Location: Perth, South
Posts: 3,064
|
it won't sieze as such, they just wear out and get loose...all i know is it's definitely coming from the rear end, where i can't tell cause i have noone else to drive the car or listen in the back for the noise...but if it's uni joints they can cause driveshaft vibrations
|
||
22-07-2007, 11:42 AM | #12 | |||
Regular Member
Join Date: Nov 2006
Posts: 179
|
Quote:
would these vibrations be magnified when under braking? Im finding the vibration/shaking most there... |
|||
22-07-2007, 11:47 AM | #13 | ||
FF.Com.Au Hardcore
Join Date: May 2006
Location: Perth, South
Posts: 3,064
|
probably not, does it vibrate through the steering wheel when braking or in the rear? it could be as mentioned wheel bearings or even brakes or tyre pressures/balance
|
||
22-07-2007, 11:48 AM | #14 | |||
Regular Member
Join Date: Nov 2006
Posts: 179
|
Quote:
|
|||
22-07-2007, 11:54 AM | #15 | ||
FF.Com.Au Hardcore
Join Date: May 2006
Location: Perth, South
Posts: 3,064
|
around what speed does it do it? does it do it only when braking or if you only take your foot off the accelerator, without braking?
|
||
22-07-2007, 12:07 PM | #16 | |||
Regular Member
Join Date: Nov 2006
Posts: 179
|
Quote:
|
|||