|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-11-2007, 12:01 PM
|
#1 | ||
|
Starter Motor
Join Date: Nov 2007
Posts: 20
|
my 98 au has a rude noise coming from the engine. i thought it was one
of the pullies making this noise so i removed the flat belt. no noise. all the idle pullies around the tensioner seem ok. the water pump pully does not spin that well so i think its the problem. can i just change the pully with out pulling the pump out. thanks |
||
|
|
|
05-11-2007, 12:34 PM
|
#2 | ||
|
V8 Powaah
Join Date: Jan 2005
Location: Sunshine Coast, QLD
Posts: 1,994
|
100% on the tensioner pulleys?
My car started sounding like it had a supercharger. It was a cactus tension pulley (The plastic one). Would be surpried at a water pump pulley though. Can anyone answer his question?
__________________
FG G6E Turbo- Seduce & Cashmere - Sold XF S pack Sedan- AU 302 Windsor, T5, 2.77 LSD, Many Mods
|
||
|
|
|
|
05-11-2007, 12:37 PM
|
#3 | ||
|
Starter Motor
Join Date: Nov 2007
Posts: 20
|
thanks mate ill have another look. mine sound like its a electric motor
|
||
|
|
|
|
05-11-2007, 01:37 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
the tensioner is the main candidate you can get the bearings cheap enough and they are a weak point. take the belt off and try spinning the different pullys by hand just to be sure at this low speed it may show nothing but worth a try.
|
||
|
|
|
|
05-11-2007, 03:07 PM
|
#5 | ||
|
Canadian User Inside
Join Date: Nov 2007
Location: Alberta,Canada
Posts: 4
|
So when you removed the (flat?) belt, you ran the engine and the noise was gone?You said the water pump pulley was hard to turn? It could be the water pump bearing it self starting to sieze. I would checked the idler and tentioner pullies just to make sure 100% that they are still good.
__________________
1995 F-150 5.8L XL 6" TC lift on 35" Pro Comp A/T 2008 F-150 5.4L XLT Technician for Ford of Canada. |
||
|
|
|
|
05-11-2007, 05:09 PM
|
#6 | ||
|
Starter Motor
Join Date: Nov 2007
Posts: 20
|
the idler pullies seemed ok. the water pump pullie wasn't hard to turn just didn't spin freely. im going to check them again.
thats every one for you input i am very greatful. |
||
|
|
|
|
05-11-2007, 05:38 PM
|
#7 | ||
|
Starter Motor
Join Date: Nov 2007
Posts: 20
|
i just rechecked the pullies the tensioner pullies seem ok. they spin freely and have very little play(is that axil play) i really hope it is the tensioner pullies. the water pump
flang look like a to clean up for the new gasket. |
||
|
|
|
noisy engine
Hybrid Mode