|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway. |
 |
|
|
Thread Tools | Display Modes |
|
|
08-01-2008, 09:20 PM
|
#1 | ||
|
Supercharged Mang-mobile
Join Date: Jul 2005
Location: Behind the wheel
Posts: 1,792
|
Hey everyone, I'm soon taking delivery of an t5 fitted, EL XR6.
One thing im planning to do is have a go taking it down the strip at willowbank. As i've never done this before im abit curious in regards to how to launch the car properly to get a decent launch without bogging down or going up in smoke lol. Anyone have any advice? Thanks, Sam
__________________
09/00 VX HSV XU6 Build #0001 of 0171 http://fordforums.com.au/showthread....09#post5571209 -- Best E/T: |14.982 @92.12mph | R/T:0.013 | 60' 2.213| 330: 6.283 | 1/8: 9.624 @ 73.17mph | 1000: 12.529 | 25Deg, N/A Hum, 1010mb | Willowbank Raceway 7/12/16 Tickford EL Falcon XR6 RIP  -- Factory Manual -- Best E/T: |14.991 @ 92.71mph | R/T: 0.607 | 60': 2.215 | 660': 9.665 |13Deg, 86%H, 1024mb, 184RA @ Willowbank Raceway |
||
|
|
|
08-01-2008, 09:56 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2006
Location: Rockingham WA
Posts: 1,234
|
Try 3000 first up, if it bogs down go up 500 rpm. Go up in smaller increments until you pretty much find a happy medium. Ease it first off and as you get a few runs you'll know how harsh you can release the clutch before it becomes useless.
Also the BBM comes on around 3500-4000 as well so it will be a bit different trying to launch at that rpm, it will probably tyre spin. Also depends on what wheels you're running. If it is low profiles, a small burnout (if that) just to get the water off should be fine. Too big and the tyres leach a bit, become too soft and will just spin. But half the fun is finding these things out the hard way.  it:
__________________
A philosopher is a person who finds a problem for every solution . :Reverend: 95 EF XR8, Advance headers, Vortech V2 t trim blower, Ported Cobra Manifold, Capa Switch Chip Eliminator. 307 rwhp 395 ft/lb 13.2 @ 105mph Now NA- AFR 165 heads, 1.6RR, Ported Cobra 269rwhp 14.2 ... needs stall and 4.11's 1977 CL Chrysler Panel Van, 360, 727 torqueflite auto soon to be restored. |
||
|
|
|
|
08-01-2008, 10:13 PM
|
#3 | ||
|
Supercharged Mang-mobile
Join Date: Jul 2005
Location: Behind the wheel
Posts: 1,792
|
Sweet ill give that a go. Thanks for that!
__________________
09/00 VX HSV XU6 Build #0001 of 0171 http://fordforums.com.au/showthread....09#post5571209 -- Best E/T: |14.982 @92.12mph | R/T:0.013 | 60' 2.213| 330: 6.283 | 1/8: 9.624 @ 73.17mph | 1000: 12.529 | 25Deg, N/A Hum, 1010mb | Willowbank Raceway 7/12/16 Tickford EL Falcon XR6 RIP -- Factory Manual -- Best E/T: |14.991 @ 92.71mph | R/T: 0.607 | 60': 2.215 | 660': 9.665 |13Deg, 86%H, 1024mb, 184RA @ Willowbank Raceway |
||
|
|
|
|
09-01-2008, 11:46 AM
|
#4 | ||
|
KenneBell Australia
Join Date: Nov 2005
Location: Engine building room
Posts: 1,965
|
Watch the input shaft........
__________________
Bluepower Racing Developments Proud Australian Distributors of Kenne Bell superchargers The Quickest, The Fastest, The Baddest Boss Blower of all. www.bluepower.com.au |
||
|
|
|
correct launching technique
Hybrid Mode