|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
16-03-2008, 07:16 PM | #1 | ||
XA GT
Join Date: Feb 2007
Posts: 2,128
|
I own an AU XR6 series 1 and its just ticked over 150000km. Over the last 3000km(aprox) the oil pressure has been very low when the engine is at full operating temp. At 100km/h the gauge sits between the to bottom white marks and at idle it goes into the red and brings on the low oil pressure light. When the engine is cold the oil pressure is great (reads half on the gauge), so I'm thinking the oil I'm using is now to thin at operating temp. The oil I have been using since 90000km is Valvoline durablend semi-synthetic 5w/30 which I change every 10000km and haven't had a problem until now. So what weight oil do people think I should now use, or do you think that the oil isn't the problem and something else is wrong.
|
||
16-03-2008, 10:05 PM | #2 | ||
Tickford Tough
Join Date: Sep 2006
Location: Adelaide
Posts: 425
|
This has come up a few times now. Have the oil pressure tested, most likely a bunged oil pressure sensor though. The series 1 also has a problem with an earth wire causing the fault you've described. Cost me $50 for half an hours labour to have a Ford dealer fix, (was done a couple of times before by different auto elecs but fault returned soon after, is all good now.)
__________________
Sparkling Burgundy T1 TE50 Build #027 - SOLD |
||
24-03-2008, 11:15 AM | #3 | ||
XA GT
Join Date: Feb 2007
Posts: 2,128
|
I have changed the oil and put 10/40 semi-synthetic oil in it and the oil pressure is back to normal (gauge reads between half and the next line).
|
||