Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Mondeo

Reply
 
Thread Tools Display Modes
Old 27-03-2008, 08:19 PM   #1
inertiac
Starter Motor
 
Join Date: Mar 2008
Posts: 1
Default 97 Mondeo Thermo comparison

Hey, just picked meself up a 1997 Mondeo and I've noticed the temp gauge moves about a lot, and gets quite high. I found a pretty useful page on common Mondeo problems, which says that they normally read high, so I'm not too worried, but when waiting at traffic lights etc I can see it rise to the 'L' in NORMAL. Just wondering what everybody else with a Mk1/mk2 model considers normal temp gauge behavior, with Australian weather?

inertiac is offline   Reply With Quote Multi-Quote with this Post
Old 27-03-2008, 08:39 PM   #2
paulie0735
FF.Com.Au Hardcore
 
paulie0735's Avatar
 
Join Date: Jan 2007
Location: Melbourne northern suburbs
Posts: 4,025
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech article(s) 
Default

If it were mine I would get it checked out by a reputable cooling system specialist. They will be able to tell you what’s 'normal' and what’s hot.
paulie0735 is offline   Reply With Quote Multi-Quote with this Post
Old 19-05-2008, 09:35 AM   #3
Simon_Koala
Starter Motor ?
 
Join Date: Apr 2008
Posts: 190
Default

Quote:
Originally Posted by inertiac
Hey, just picked meself up a 1997 Mondeo and I've noticed the temp gauge moves about a lot, and gets quite high. I found a pretty useful page on common Mondeo problems, which says that they normally read high, so I'm not too worried, but when waiting at traffic lights etc I can see it rise to the 'L' in NORMAL. Just wondering what everybody else with a Mk1/mk2 model considers normal temp gauge behavior, with Australian weather?
Mine does the same (its also a '97 Mk2), but according to what info I'm able to gleam from searching the net, its normal. So I am not worried. I had a cooling system pressure test and flush done a few weeks ago by my local Ford dealer, and they filled it up with the (expensive) Ford approved coolant and it didn't change the way the water temp dial operates, so that pretty much confirms that it does run on the higher half of the temp scale dial. When asking the service manager, he confirmed the same - that Mondeo's just tend to run hot compared to some other cars.
Simon_Koala is offline   Reply With Quote Multi-Quote with this Post
Old 19-05-2008, 07:22 PM   #4
jared79
Sock Puppets
 
jared79's Avatar
 
Join Date: Dec 2007
Location: Brisbane
Posts: 154
Default

No probs with mine. Sits at about 90 deg and stay there.
__________________

Ford Mondeo Zetec Hatch in Blue Ambition
jared79 is offline   Reply With Quote Multi-Quote with this Post
Old 19-05-2008, 09:19 PM   #5
apstar
FF.Com.Au Hardcore
 
apstar's Avatar
 
Join Date: Apr 2008
Location: Sydney
Posts: 917
Default

Does the Mondeo have an intercooler for the turbo?

apstar
apstar is offline   Reply With Quote Multi-Quote with this Post
Old 10-06-2008, 08:19 AM   #6
OZXR4
formally ozmondeo
 
OZXR4's Avatar
 
Join Date: Jan 2005
Location: SE burbs Melbourne
Posts: 166
Default

Mine had the same problem then it stopped working, it is a fault in the engine temp sensor.
__________________
2008 Fiesta XR4 Sea Grey
OZXR4 is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2008, 08:11 AM   #7
Simon_Koala
Starter Motor ?
 
Join Date: Apr 2008
Posts: 190
Default

Quote:
Originally Posted by ozmondeo
Mine had the same problem then it stopped working, it is a fault in the engine temp sensor.


Where does the needle now sit when operating the car in normal conditions, now that the fault has been fixed ?
__________________
09 Ford Focus LV XR5
Simon_Koala is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:35 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL