|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-06-2008, 09:02 PM
|
#1 | ||
|
Looking for clues...
  
Join Date: Jan 2005
Location: Morayfield
Posts: 23,556
|
I've been having issues with the AU the last couple of weeks, since the pump in the auto gearbox ceased to function.
I pulled out the gearbox, got hold of a replacement unit (only 3 month warranty), but while I was under the car, I found coolant leaking from the passenger side of the motor where the metal bypass pipes live. They were rusted out! I bought the replacement metal pipes to replace the rusted ones... but... The main pipe goes from the left rear of the engine, behind the motor and then up to the waterpump. I tried pulling the pipe out from the back of the engine, with the gearbox out, and the front of the motor jacked up... there's not enough clearance to get the old one out! I'm thinking, that since I've got the gearbox out, I should pull out the engine. Then I can fit the new heater pipe, attach the gearbox and install the two as one unit. Has anyone got a better way of replacing this heater pipe? Since I've got the gearbox out, I'm thinking of pulling the motor out Last edited by Captain Stubing; 05-06-2008 at 09:12 PM. |
||
|
|
|
12-06-2008, 09:14 PM
|
#2 | ||
|
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,556
|
Disregard... I had a couple of days off, so I ripped out the engine. I was able to replace the rotten pipe, and then fit the gearbox to the engine and fit the whole lot back into the car as one unit.
I don't see an easy way to replace that pipe! Now I've just discovered the filler plug on the gearbox has a 5 sided head!  : Once I get some fluid into the box, it'll be good... I hope |
||
|
|
|
|
12-06-2008, 09:22 PM
|
#3 | ||||
|
Back to Le Frenchy
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
|
Quote:
__________________
Quote:
07 Renault Sport Megane F1 Team R26 #1397
|
||||
|
|
|
|
12-06-2008, 09:26 PM
|
#4 | ||
|
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,556
|
16mm socket slipped right off...
The dead gearbox has a different head on the filler plug... 6 sided 16 mm. Last edited by Captain Stubing; 12-06-2008 at 09:45 PM. |
||
|
|
|
Heater bypass pipe
Hybrid Mode