|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
18-08-2008, 06:06 PM
|
#1 | ||
|
Regular Member
Join Date: May 2007
Location: Adelaide
Posts: 79
|
Hey guys just wondering how you change the globe which lights up behind the kilometers display. I have a 2002 Au Series 3. It seems to be the right hand side that has blown so i am guessing there are two globes.
Any help would be great. Cheers Darren |
||
|
|
|
18-08-2008, 06:08 PM
|
#2 | ||
|
'04 BA XT
Join Date: Jun 2006
Location: Melbourne
Posts: 2,481
|
they use light channels so it might only be one... either way you have to take the cluster out... the globes clip into the back of that..
__________________
1979 F350 Tow Truck 80 series Turbo Diesel Cruiser |
||
|
|
|
|
18-08-2008, 06:11 PM
|
#3 | ||
|
Regular Member
Join Date: May 2007
Location: Adelaide
Posts: 79
|
how hard is it to take the cluster out.
|
||
|
|
|
|
18-08-2008, 06:14 PM
|
#4 | ||
|
'04 BA XT
Join Date: Jun 2006
Location: Melbourne
Posts: 2,481
|
only ever done it on an EL and BA... I'm assuming its more like an EL... you have to take the surround out and you will see about 5 screws or so... undo these and it should pull out... even easier to do on a BA but I dont think the AU runs that set up... Basically you'll pull a few of the dash pieces off... not too hard just take your time.
__________________
1979 F350 Tow Truck 80 series Turbo Diesel Cruiser |
||
|
|
|
|
18-08-2008, 06:15 PM
|
#5 | ||
|
Regular Member
Join Date: May 2007
Location: Adelaide
Posts: 79
|
and i should be able to get a replacment globe from repco etc.
|
||
|
|
|
|
18-08-2008, 07:26 PM
|
#6 | ||
|
Wanting a sprint!
Join Date: Jul 2007
Location: In Between The Lines!
Posts: 925
|
Just 2 screws under the plastic plugs at the top of cluster and about 3 wiring harness to unclip easy as.
Just slide the cluster out after the screws are out nothing else is holding it in.
__________________
On track for mint turbo falcon |
||
|
|
|
|
18-08-2008, 11:43 PM
|
#7 | ||
|
T3 TS50 075
Join Date: Nov 2007
Location: Perth
Posts: 1,146
|
just done mine last weekend part number is ER 10B765 D
cost of globes are about $5 each same globes do the clock aswell get a large screwdriver in through the holes were the boot release button is and yuo may just need to prise the top edge of the crash pad up over the clips on the cluster Cheers John
__________________
Cheers John My car T3 TS50 #75 Blueprint manual 1/4 mile 13.38 @ 102.97 mph  TS 50 = 237.1 rwkw
|
||
|
|
|
How to change Globe in dash
Hybrid Mode