|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
31-01-2009, 02:10 PM
|
#1 | ||
|
AULTD
Join Date: Mar 2005
Location: Langwarrin
Posts: 818
|
Can anyone tell me if I bridge terminals 30 and 87 where the starter relay plugs in should the starter motor crank? This is on an AUII V8.
I have checked that there is 12V coming from terminal 30 but when I plug the wire into 87 nothing happens. Does the key have to be on? I am trying to track down a starting problem ( see other thread ) |
||
|
|
|
31-01-2009, 04:04 PM
|
#2 | ||
|
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
Go buy a spare relay.Unplug each one at a time and see if the car starts
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again 
|
||
|
|
|
|
31-01-2009, 04:55 PM
|
#3 | ||
|
AULTD
Join Date: Mar 2005
Location: Langwarrin
Posts: 818
|
I have swapped the relays and no difference.
The manual tells me to bridge terminals 30 and 87 which takes the relay out of the equation. What I want to know if someone else can bridge these terminals and see if the starter motor cranks over. Try it with the key off and key on. The manual is a bit vague. |
||
|
|
|
|
31-01-2009, 06:20 PM
|
#4 | ||
|
AULTD
Join Date: Mar 2005
Location: Langwarrin
Posts: 818
|
I put a multimeter on the small wire that goes to the starter motor and with the terminals mentioned above bridged the power is reaching the solenoid.
I also checked the large 12V supply from the battery and it is also getting to the starter motor. It is pointing towards the solenoid being faulty. I know you can bridge the terminals on the back of the starter motor with a screwdriver but I don't want to be under the car with it trying to start. |
||
|
|
|
Starter relay
Hybrid Mode