|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
21-08-2009, 07:53 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 721
|
Hey,
Ive noticed a really bad noise coming from under the rocker cover, its pretty loud once the revs pick up to about 2000 rpm+ and gets louder the hotter the engine is. I'm pretty certain its either a lifter or a valve spring. Ive decided i want to replace most of the top end. I'm looking at replacing the valve springs and lifters but what else should i replace to give the engine a new lease at life, and what aftermarket gear is out there that is available for the I6 VCT? |
||
|
|
|
23-08-2009, 07:11 PM
|
#2 | ||
|
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
Get performane valve springs while your at it and performance retainers.This way you can install a bigger lift cam without headaches. Also you would want to change you lifters as well.
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again 
|
||
|
|
|
|
23-08-2009, 07:26 PM
|
#3 | ||
|
Just slidin'
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
|
The Valve springs and retainers are available from JMM, Surecam and Crow cams (?).
__________________
MD Mondeo - For the family
NP Pajero - For the adventure |
||
|
|
|
|
23-08-2009, 10:14 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 721
|
Ive sent Crow cams an email, im also enquiring about an aftermarket cam, but with the VCT engine im not to sure...
I actually noticed the noise during a drag race with a mates 1996 vs statesman which btw does a 14.026 on the 1/4 mile. The thing has got me stumped how its pulling a time like that, hes confident if he pushes it off the line a little harder hell crack 13 seconds, its a v6. He tells me with 100 dollars and 5 mins to install it, he should hit around 13.5... But that wont be till next week. |
||
|
|
|
|
01-09-2009, 09:26 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 721
|
Well, i still cant get a reply from Crowcams, so ill ask here aswell.
Does anyone know if the cam, Part No. 2232546 can be used on the VCT motor. The other cams say Not for VCT or XR6, while the bottom 3 on the table dont. http://www.crowcams.com.au/media/cat...20%20EA-AU.pdf BTW, the VS statesman i was talking about, turns out hes got a supercharger on it, i caught him with the bonnet up. He was trying to keep it a secret lol. |
||
|
|
|
Valve springs etc
Hybrid Mode