|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
08-06-2011, 05:44 PM
|
#1 | ||
|
Regular Member
Join Date: Nov 2009
Posts: 57
|
Hey guys,
Just wondering if anyone's had the following problem: When engine drops from high revs to idle, the breather connected to the inlet manifold opens and causes a sucking/hissing noise and causes engine to diesel Now, as for a possible solution, would removing the whole setup be recommended? I've read in a few posts that people have done this with no detrimental effects to engine running.
__________________
Regards, Tim ------------------------------ 1978 Ford Escort Panelvan |
||
|
|
|
13-07-2011, 08:34 AM
|
#2 | ||
|
Starter Motor
Join Date: Feb 2011
Location: Toowoomba, QLD
Posts: 1
|
I took mine off my 1.6. Made no difference, I can still turn it off and what not. Just make sure you plug the hole up on the manifold.
Brandon. |
||
|
|
|
Anti Dieseling Solenoid
Hybrid Mode