|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
09-02-2013, 11:52 AM | #1 | ||
Jeep/Mercedes Technician
Join Date: Mar 2012
Location: Bundaberg
Posts: 155
|
I have finally bought the ba intake tubing from TB to air box, the only issue I have is that there is a small hose off the back of the engine that doesn't reach the correct location on the ba intake.
What has everyone done to get it to work correctly??
__________________
The Ride FGX XR8, Silhouette, Manual, 500HP, 940NM, Tune, 71mm Pulley, KPM Intercooler, BMC Twin Air Filter |
||
09-02-2013, 12:09 PM | #2 | ||
Au Falcon = Mr Reliable
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
|
G'day Storme93,
go to your local auto parts supplier & get some 5/8's or 16mm heater hose (1 meter max), cut to size from the rocker cover breather outlet to the intake inlet, then fit a couple of black zip ties to fasten each end of hose. cheers, Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792 Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007) |
||