Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > The Bar

The Bar For non Automotive Related Chat

Reply
 
Thread Tools Display Modes
Old 22-01-2014, 12:07 PM   #1
Craigos
Starter Motor
 
Join Date: Jan 2014
Posts: 9
Default Yo There

Hi to all, another newbie calling through to say hello.

Got an 03 BA Sedan, usual issues, but an ok car I suppose....

If the damn handbrake wasn't such a pain I would rate it higher....

Cheers

Craigos is offline   Reply With Quote Multi-Quote with this Post
Old 22-01-2014, 10:21 PM   #2
jaydee
FF.Com.Au Hardcore
 
jaydee's Avatar
 
Join Date: Feb 2007
Location: Perth
Posts: 7,254
Default Re: Yo There

Hey mate and welcome, yep the BA, what can I say. I'm in the same boat, hand brake, front discs warping, headlights blowing, roof lining falling in, door lock actuators, drivers door window regulator (twice), radiator by pass for tranny, heater (dash out job), and the list goes on.
Good motor though, very reliable.
__________________
jaydee351
4DV8
jaydee is online now   Reply With Quote Multi-Quote with this Post
Old 22-01-2014, 11:09 PM   #3
Craigos
Starter Motor
 
Join Date: Jan 2014
Posts: 9
Default Re: Yo There

Yeah, if they made the car out of the same stuff the engine is made out of, then, all would be good......

Biggest issue is the stalling issue when just cruising along.....

I have found a thread on here about the reset procedure for both the ECU and the TPS. I did that two nights ago, and, the car hasn't gone so well. Really pulls like a train, at the moment.
If it does the stall again, i will replace the TPS. It currently has the original OEM version with the depression in the housing.

Does anyone else have that annoying "ticking" sound in the interior fan ?
It improved when i cleaned the intake filter screen, but, i dunno, it must be a male thing, cause the wife and daughter cant hear it, but i and any other guys in the car can....
Craigos is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2014, 12:03 AM   #4
pottery beige
FF.Com.Au Hardcore
 
Join Date: Jun 2009
Posts: 18,988
Default Re: Yo There

Quote:
Originally Posted by jaydee View Post
Hey mate and welcome, yep the BA, what can I say. I'm in the same boat, hand brake, front discs warping, headlights blowing, roof lining falling in, door lock actuators, drivers door window regulator (twice), radiator by pass for tranny, heater (dash out job), and the list goes on.
Good motor though, very reliable.
i've had none of those problems



you got a dud
pottery beige is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 23-01-2014, 09:01 AM   #5
Craigos
Starter Motor
 
Join Date: Jan 2014
Posts: 9
Default Re: Yo There

I suspected the leaf thing, but I think it more related to the motor, or the bearings.... Have blown the whole thing out with compressed air, spun the fan back and forward by hand....but the only time you hear the tick is when it is operating.
Just have to put up with it....

Craigos is offline   Reply With Quote Multi-Quote with this Post
Old 22-01-2014, 11:59 PM   #6
csv8
FF.Com.Au Hardcore
 
csv8's Avatar
 
Join Date: Dec 2004
Location: Central Q..10kms west of Rocky...
Posts: 8,310
Default Re: Yo There

Could be a leaf in the fan..will go away as the leaf dries and fan chops it up..seriously!!
__________________
CSGhia
csv8 is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2014, 09:24 AM   #7
msman
FF.Com.Au Hardcore
 
Join Date: Oct 2005
Posts: 589
Default Re: Yo There

take the fan out and lube the lower bush, normally makes a squiking noise though.
3 phillips head screws, get your head right under the glove box and you will see them.
whole fan assembly comes out.
then just pull it apart on the work bench and clean all parts, lube the lower motor bush some good oil will do it.
probably about an hours job.
if you do a search there is a write up here with pics.
msman is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2014, 09:42 AM   #8
Craigos
Starter Motor
 
Join Date: Jan 2014
Posts: 9
Default Re: Yo There

Cheers for that.... I looked at the fan box and thought screw that.... But if you reckon it's an easy out....then I will have a go....will look for the thread pics too.
Thanks again....
Craigos is offline   Reply With Quote Multi-Quote with this Post
Old 23-01-2014, 08:36 PM   #9
MercurySilver
Isn't it obvious?
Donating Member1
 
MercurySilver's Avatar
 
Join Date: Nov 2009
Location: in a world of idiots
Posts: 5,383
Default Re: Yo There

Do what I did.....traded it in and bought a turbo
__________________
08 Strike G6E T.
10 Ergo G6E
Sept 75 XB Falcon in mushroom beige, 3 on the tree 200cid for sale, offers in the teens
MercurySilver is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 03:33 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL