Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 27-01-2014, 05:05 PM   #1
Stefan
FF.Com.Au Hardcore
 
Stefan's Avatar
 
Join Date: Jun 2005
Posts: 5,193
Default Death of Australian Car Manufacturing - Another point of View.

I had a read if a Modern Motor Article.....August 1972 and it made me double take a bit.

The test was dubbed "The Supercars" a shoot out between Ford XA GT, Holden HQ 350 GTS and Chrysler E38. Besides the interesting dissection of the each car, what made me double take is the opening few paragraphs, that told of each of the three manufacturers actually had no car to give out for a review. It stated the three big manufacturers don't have these high end models in their test fleet.

Cars ended up being sought from Dealers.

My thought was, were the car manufacturers back in 1972 a little more careful with cash. Probably not a coincidence that all three did not stump up cars and Modern Motor Mag did not expect them to be able to either.

I'm not saying its the only thing that killed our car makers but it just demonstrates a different generation that may have exercised a little more constraint if it had to.

Stefan is offline   Reply With Quote Multi-Quote with this Post
Old 27-01-2014, 05:14 PM   #2
lupin
Regular Member
 
lupin's Avatar
 
Join Date: Apr 2006
Location: Clifton springs
Posts: 49
Default Re: Death of Australian Car Manufacturing - Another point of View.

Think it would have been more that they didn't want negative publicity. You have to remember this was the time of the super car scare when these things were being viewed as things that killed and used too much fuel.

And it still goes on. There are many reviews that I'm sure are done on cars that aren't supplied by the maker.
__________________
White FG XR6T owner

White WRX owner
lupin is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 27-01-2014, 05:24 PM   #3
Stefan
FF.Com.Au Hardcore
 
Stefan's Avatar
 
Join Date: Jun 2005
Posts: 5,193
Default Re: Death of Australian Car Manufacturing - Another point of View.

Interesting take.

The funny thing is the article did close with a paragraph saying they can't wait for the GTHO Phase 4 "It (Phase 4) will be worth waiting for"
Stefan is offline   Reply With Quote Multi-Quote with this Post
Old 27-01-2014, 06:52 PM   #4
Ford17
FF.Com.Au Hardcore
 
Ford17's Avatar
 
Join Date: Jul 2009
Location: Brisbane
Posts: 1,304
Default Re: Death of Australian Car Manufacturing - Another point of View.

Interesting thoughts.

I often wonder why there are so many new cars, which could otherwise be sold for cashflow and profit, which are given to various people and groups as 'company' or loan cars.

Then there are often a multitude of used cars for sale at any one time, which are referred to as "Ford executive driven".

Particularly with Holden in the case of V8 Supercars, each driver seems to have a road car provided to them.

Not to mention the overall motorsport spend by local manufacturers, circa 1970's versus recent times. It seems to be massive these days, despite the fact they can hardly afford it.
Ford17 is offline   Reply With Quote Multi-Quote with this Post
Old 27-01-2014, 08:32 PM   #5
superyob
Banned
 
Join Date: Jun 2010
Posts: 2,811
Default Re: Death of Australian Car Manufacturing - Another point of View.

Stefan, who won the shootout? Can you post it up or will that breach copyright?
superyob is offline   Reply With Quote Multi-Quote with this Post
Old 27-01-2014, 09:40 PM   #6
Stefan
FF.Com.Au Hardcore
 
Stefan's Avatar
 
Join Date: Jun 2005
Posts: 5,193
Default Re: Death of Australian Car Manufacturing - Another point of View.

I have no scanner and it is a copy of a copy so a bit dodgy.

Interesting points.

Performance.

Acceleration 0 to 60MPH
Charger 6.3
Falcon 7.7
Holden 9.3

Quarter
Charger 14.8
Ford 15.1
Holden 15.3

Interesting one (shows torque and drivability
Acceleration (in top gear)
20 - 40 MPA
Holden 4.0 Sec
Ford 6.5 Sec
Charger 6.8 Sec

Braking 60 - 0
Ford 3.8 sec
Holden 4.0 sec
Charger 4.8 sec Woeful

Funny one, Tacho accuracy

Indicated Actual
Ford 6000 5600
Charger 6000 5800
Holden 6000 4300

Driving in summary

Handling, the Monaro was the worst, with Charger on top and Falcon close behind.

Day to Day drivability in traffic and easiest to live with is the Monaro as it is torquey, has the best vision and nicest gearshift (and needs less shifting due to torque from the 350).

All round performance compromise (does everything it has to) Falcon on top, but notes average gearshift susceptible to have a fist full of nothing ie shifter jambs up. (I took my XA GT for a drive today and this happened twice, so had to laugh as it was like that from the factory)

Also noted XA had the worst vision, but they meant it was real hard to judge the cars extremities when parking etc.

Charger suffered badly due to 3 speed and brake pedal pressure 3 time higher than others. Could not lock brakes using both feet.

Last edited by Stefan; 27-01-2014 at 09:48 PM.
Stefan is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 28-01-2014, 12:55 PM   #7
castellan
FF.Com.Au Hardcore
 
Join Date: Apr 2009
Posts: 2,215
Default Re: Death of Australian Car Manufacturing - Another point of View.

Quote:
Originally Posted by Stefan View Post
I have no scanner and it is a copy of a copy so a bit dodgy.

Interesting points.

Performance.

Acceleration 0 to 60MPH
Charger 6.3
Falcon 7.7
Holden 9.3

Quarter
Charger 14.8
Ford 15.1
Holden 15.3

Interesting one (shows torque and drivability
Acceleration (in top gear)
20 - 40 MPA
Holden 4.0 Sec
Ford 6.5 Sec
Charger 6.8 Sec

Braking 60 - 0
Ford 3.8 sec
Holden 4.0 sec
Charger 4.8 sec Woeful

Funny one, Tacho accuracy

Indicated Actual
Ford 6000 5600
Charger 6000 5800
Holden 6000 4300

Driving in summary

Handling, the Monaro was the worst, with Charger on top and Falcon close behind.

Day to Day drivability in traffic and easiest to live with is the Monaro as it is torquey, has the best vision and nicest gearshift (and needs less shifting due to torque from the 350).

All round performance compromise (does everything it has to) Falcon on top, but notes average gearshift susceptible to have a fist full of nothing ie shifter jambs up. (I took my XA GT for a drive today and this happened twice, so had to laugh as it was like that from the factory)

Also noted XA had the worst vision, but they meant it was real hard to judge the cars extremities when parking etc.

Charger suffered badly due to 3 speed and brake pedal pressure 3 time higher than others. Could not lock brakes using both feet.
Come on the HQ 350 would not rev to 6000RPM. and that taco is not the norm and even an idiot would know 4300RPM is not 6000 come on.

A lot of these test drivers are just hopeless, you will see some fool revving a HQ 350 right out in 1st 2ed gear and you know that's still no the way you make porridge. you use the torque in 1st 2ed just going to 4500RPM then change she is off the boil at over 4500RPM yes she still pulls but not by half.
castellan is offline   Reply With Quote Multi-Quote with this Post
Old 28-01-2014, 06:07 PM   #8
Stefan
FF.Com.Au Hardcore
 
Stefan's Avatar
 
Join Date: Jun 2005
Posts: 5,193
Default Re: Death of Australian Car Manufacturing - Another point of View.

Quote:
Originally Posted by castellan View Post
Come on the HQ 350 would not rev to 6000RPM. and that taco is not the norm and even an idiot would know 4300RPM is not 6000 come on.
Story was quite funny about how they managed to rev it to 7,200 without valve bounce on the track. They know by feel imeditely that the tacho was out by a country mile.

Yeah I know journos are all idiots, I know that all of us on the forum know so much more about cars than motor journos who test cars for a living and have access to just about every new car released. As for this story heck havn't we all thrashed an XA GT, HQ350 Monaro and E38 when new back to back on a closed track.
Stefan is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 30-01-2014, 12:38 PM   #9
castellan
FF.Com.Au Hardcore
 
Join Date: Apr 2009
Posts: 2,215
Default Re: Death of Australian Car Manufacturing - Another point of View.

Quote:
Originally Posted by Stefan View Post
Story was quite funny about how they managed to rev it to 7,200 without valve bounce on the track. They know by feel imeditely that the tacho was out by a country mile.

Yeah I know journos are all idiots, I know that all of us on the forum know so much more about cars than motor journos who test cars for a living and have access to just about every new car released. As for this story heck havn't we all thrashed an XA GT, HQ350 Monaro and E38 when new back to back on a closed track.
Mistaken 6 cyl tacho could be the answer.
I think i have read a lot of car mags and the amount of journos who are in depth is not many. they get a car given to them that does not run right etc and they still test it, just hopeless ! running bodgy examples.
So no my faith in journos is not what i would hope for, in fact aussie motoring jounos have been crappy standards that reflect only mainly clowns.
Your referral as to all of us on the forum knowing, you may be right but just some of us may be more that just enthusiast that others.
You know one could get a new car that one may not be happy with it's performance or handling but taken to the right person that car can be tweaked just a bit that she becomes a excellent car. and these idiots should have the understanding that if there is something they are bagging about a car that there is a cure to it or not.
Even Bill Tuckey could not grasp what Peter Hanenberger was saying about RTS and dampers with the HZ. it's all about geometry, dampers only function is to control the ride.
castellan is offline   Reply With Quote Multi-Quote with this Post
Old 27-01-2014, 10:31 PM   #10
new2ford
FF.Com.Au Hardcore
 
new2ford's Avatar
 
Join Date: Mar 2005
Location: Shoalhaven
Posts: 3,161
Default Re: Death of Australian Car Manufacturing - Another point of View.

Recently I was reading Mary Groves "An Outback Life" about her life on cattle stations in the NT at around that time. On one occasion they bought a Monaro (later finding they'd been financially diddled by the dealer) and it ingested dust so badly she could, as she put it, only see her children in the back seat "when they opened their eyes"!

They quickly got rid of it and bought a Falcon which was OK.
new2ford is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 10:08 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL