|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
25-02-2021, 11:15 AM
|
#1 | ||
|
Regular Member
Join Date: Oct 2018
Posts: 31
|
How do I fix this? It's the cap that's covering the power steering...
|
||
|
|
|
25-02-2021, 12:38 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Oct 2020
Posts: 670
|
You need a new rack boot. Then remove the tie rod end from the steering knuckle and slide the new boot on, reassemble.
Really there is only two ways to do this once you remove the tie rod end from the steering knuckle. You either unwind the tie rod end from the rack to get the new boot on, or you try slide the boot on with the tie rod end still attached to the rack, the 2nd method can be more difficult in some ways, but wrapping the tie rod in glad wrap and oiling it up can work sometimes. |
||
|
|
|
Power steering new cap?
Hybrid Mode