|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
|
29-07-2005, 12:28 PM | #1 | ||
Regular Member
Join Date: Feb 2005
Location: Sydney
Posts: 184
|
I have a wicked whinening sound coming from my diff at the moment. Mechanic says he can't tell what the problem is till he takes it out for a look and estimates rebuild with labour is between $1300 - $2000 depending on what needs replacing. We're talking about an XR LSD here. Has anyone else here had similar problems or know of a good diff specialist in Sydney?
|
||
29-07-2005, 04:25 PM | #2 | ||
fully *** turboooo
Join Date: Dec 2004
Location: Eastern Suburbs, Melbourne
Posts: 523
|
1300-2000?!!!!!!!!
sounds awfully steep, when you could buy a whole new 9" setup for that much ...
__________________
AU1 Forte 178.6rwkw @ 5 psi Highflowed T03, Intercooled Full comp insurance :nutsycuck
|
||
29-07-2005, 07:55 PM | #3 | ||
_Oo===oO_
Join Date: Dec 2004
Location: Canberra
Posts: 1,471
|
Good diff specialist in Sydney - Craft Diffs, located in Granville.
Contact numbers are: 9637 1973 9682 7222 Alternately I think Sox would be the one to contact on here.
__________________
COURAGE - ENDURANCE - MATESHIP - SACRIFICE
|
||
29-07-2005, 08:17 PM | #4 | ||
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
Mate there is a dff place in Smithfield on Long st.Quoted 1400 with lsd.
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again |
||
29-07-2005, 09:00 PM | #5 | ||
Winter all year round
Join Date: Jan 2005
Location: Sydney
Posts: 671
|
My IRS lsd had a leak from the extension housing, turns out the retainer was too tight and damaged the seal, when the seal was replaced it was found that the bearing is slightly damaged. So in the future the diff will need rebuilding, i've been quoted $750 for complete stripdown, with all new bearings and seals
__________________
Some people drive sports cars on the weekend....I drive my AU! It's not what you drive...it's how you enjoy it. Recommend trading with Mechan1k, Offyaguts, EDMONTY, PhantomXR8, HOTC2R, Partie & JC |
||
30-07-2005, 03:18 PM | #6 | ||
Regular Member
Join Date: Feb 2005
Location: Sydney
Posts: 184
|
Cheers guys good info, that gives me some hope. Think I'll shop around. Will let you know how I go.
|
||
30-07-2005, 04:00 PM | #7 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne, Victoria
Posts: 2,434
|
There's a place around Melbourne, that are very well known.
They do, rebuilds on your existing diff, using brand new parts/gears, for $750. Another $350 for LSD. Drive in, Drive out.
__________________
AUIII Falcon Forte, with SIX Appeal |
||
03-08-2005, 07:44 PM | #8 | ||
Regular Member
Join Date: Jan 2005
Location: SMITHFIELD NSW
Posts: 472
|
Useless the guys you refered to is called GEAR EXCHANGE those guys always have done my diffs and the prices are better and more realistic than other diffs joints or you can try D&R DIFFS at chipping norton.
My diff is being fixed shortly going form a poxy open wheeler to a lsd.
__________________
18 T6 Multivan 03 Ba Xr turbo 300rwkw |
||
03-08-2005, 09:24 PM | #9 | |||
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
Quote:
Krusty ..I really liked the guy who ran it.He was a nice bloke.Took me for a spin in his ute....went ok.Was good to see that the 3.45 ratio change was simply not going to do much for me...so maybe 3.7 in near future.
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again |
|||
04-08-2005, 12:33 PM | #10 | ||
Regular Member
Join Date: Feb 2005
Location: Sydney
Posts: 184
|
Just picked up my car from Craft Diffs. Rebuild cost $770. Ok price I think. They turned it around in a day too. Craft told me to be careful to run new diff in which means not going over 80kmh for next 500km's. Bummer eh? Thanks for the lead Dark Horse.
|
||
03-08-2005, 08:06 PM | #11 | |||
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 1,463
|
Quote:
|
|||